[fireblade9]

Hello 

     When I'm on E-Sys 3.30.1 and right click on "FA file" and then click on "calculate FP" it shows me the following error named "PSdZ Error". I also tried it with the version 3.34 and showed me the same error. What can I do in that occasion?

" No FP could be generated from FA "". [C002]

Not all elements of the FA were found in the FA2FP: Type code KT01
SALAPA 1CB
SALAPA 2AZ
SALAPA 2VM
SALAPA 346
SALAPA 3AA
SALAPA 4DD
SALAPA 575
SALAPA 6AG
SALAPA 8BL ... ... ... [72]"

All the car's equipment (SA codes) are original and have not been modificated.

[Diagnoramix]

What data version are you using? Try Esys 36.2. Your error is probably related to old Esys versions.

R.

[Node]

Have you chosen proper chassis in connection?

[fireblade9]

I have the same results with esys v3.30-v3.34-v.3.36.2  with data version 3.32.20

Can you try for me my xml fa ??

[yomismo 01]

make a copy and upload it for someone to try if they read it

[jakubas92]

bro send tw priv help you

[user_530d]

I have the same results with esys v3.30-v3.34-v.3.36.2  with data version 3.32.20

Can you try for me my xml fa ??

This is not correct VO.
Is your car WBAKT0100H0U32952 ?

[Node]

Your FA is seriously wrong. Not only VIN ITSELF is invalid, but those options in your post are not compatible with USA PHEV F25. And they ARE NOT in original FA. Is your car PHEV at all? Assuming your short VIN is really 0U32952...

[fireblade9]

The car is phev and check vin number 0U32951

[Diagnoramix]

I included the original FA from BMW AG for this car. Can you try to open this file in Esys. If it works you can store it in the car via VCM menu.