[moriaz]

just uploaded a file to van and now not cranking plaese anyone have a look asap if anything rong with file plase

[loki954]

did you try the original file ? Explain what you did from the start. If you are using clone tool(kess) to write by obd ....not going to happen. First have to open the ecu and "unlock" the ecu for writing by obd. Ktag do this ecu with no problem(read/write) but have to open the ecu.

[moriaz]

did you try the original file ? Explain what you did from the start. If you are using clone tool(kess) to write by obd ....not going to happen. First have to open the ecu and "unlock" the ecu for writing by obd. Ktag do this ecu with no problem(read/write) but have to open the ecu.

Hey bro I got it sorted thanks basically I did mod and the van started fine read for a few seconds then cut out stared second round and cut out after that it wouldn't crank so after scratching heads it turns out that the starter relay had blown out weird as its fist time this has happened so changed rely and fired up fist time ps no clone tool used I use tg flash