Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VW Golf GTE Hybrid fault
17-01-2022, 19:31 PM,
Post: #1
|
|||
|
|||
VW Golf GTE Hybrid fault
Dear members
I have a problem that I can't solve, Vw Golf GTE Hybrid in this case the gearbox was replaced, with the same mechtronic used (all gearbox replaced) plugs have been disconnected. everything was properly installed and checked. diagnosis done via Odis tool also run via odis commissioning High Voltage system (no success) DTC: 8C= Battery Energy Control Module P0A0A = J840- Pilot Line 08= Electronics Air conditioning/heating U0460= J842- Electric air conditioning compressor. Pilot Line plug = OK Fuse = OK wiring via diagram as far as measured = OK I don't know what to do now thank you |
|||
17-01-2022, 22:07 PM,
Post: #2
|
|||
|
|||
RE: VW Golf GTE Hybrid fault
On Odis did you do the high voltage system activation function?
See well in the gateway any function to restore the system and in 08c By chance you didn't open the high voltage cooling circuit, if you did, you'll have to bleed through the odis. |
|||
Reputation: +1 - al70 [+1] | |||
19-01-2022, 17:16 PM,
(This post was last modified: 19-01-2022, 17:53 PM by Dau.)
Post: #3
|
|||
|
|||
RE: VW Golf GTE Hybrid fault
(17-01-2022, 19:31 PM)tiguan Wrote: Dear membersODIS says no communication with the climate compressor. You have to check the 2 connectors on the compressor, and the HV connector on the HV charging unit (AX4). And check the LIN wire in the compressor's connector. While you have got a fault in the HV system you can't activate it. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content