Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

2010 mondeo tdci 1.8 wont crank
17-01-2022, 20:09 PM,
Post: #1
LFord  2010 mondeo tdci 1.8 wont crank
Can someome please help me with this fault 2010 1.8 tdci

This car was parked as normal about a week ago and the next
morning the car would not start.Dash would light up as normal
but no crank.The two fault codes i am getting are P2505 and PA09.
I have checked the loom to the injectors and,from ign sw to start relay and
from start relay to ecu all ok I can get it to crank by shorting the 2 big pins on
start relay.If I have a cam belt problem will this stop it from cranking.
I will be grateful for any help
Regards
Larry.
Quote this message in a reply
17-01-2022, 21:39 PM,
Post: #2
RE: 2010 mondeo tdci 1.8 wont crank
Check all +12V (INput) and all grounds to the ECU.
Reputation: +1 - coder [+1]
Quote this message in a reply
[+] 1 user says Thank You to febeks for this post
17-01-2022, 21:50 PM, (This post was last modified: 17-01-2022, 21:52 PM by Clusters.)
Post: #3
RE: 2010 mondeo tdci 1.8 wont crank
hi

you have a power supply problem
and it looks like your ecu is dead
Reputation: +1 - coder [+1]
Quote this message in a reply
[+] 2 users say Thank You to shasse for this post
05-04-2022, 07:09 AM,
Post: #4
RE: 2010 mondeo tdci 1.8 wont crank
Will say that your ecu is dead or as often seen (when car was in front accident before) wiring is cut. Guys that repair cars dont heistage to put wiring back in its place and it rubs some metal and this happens - had few of same issues this year already. Or some animal had it for dinner.
Quote this message in a reply
[+] 1 user says Thank You to alpntrb for this post
25-05-2022, 12:47 PM, (This post was last modified: 25-05-2022, 12:49 PM by Kaja.)
Post: #5
RE: 2010 mondeo tdci 1.8 wont crank
(17-01-2022, 21:50 PM)shasse Wrote:  hi

you have a power supply problem
and it looks like your ecu is dead

How I can check if Ecu is dead?

(05-04-2022, 07:09 AM)alpntrb Wrote:  Will say that your ecu is dead or as often seen (when car was in front accident before) wiring is cut. Guys that repair cars dont heistage to put wiring back in its place and it rubs some metal and this happens - had few of same issues this year already. Or some animal had it for dinner.

I have checked the wiring harness everything is in order
Quote this message in a reply
22-01-2023, 14:26 PM,
Post: #6
RE: 2010 mondeo tdci 1.8 wont crank
check harness under left headlamp, very common to corrode
Quote this message in a reply
23-01-2023, 01:04 AM,
Post: #7
RE: 2010 mondeo tdci 1.8 wont crank
Also, if this is a blade key vehicle. check to make sure after key is turn, output voltages are correct. You will need diagram to identify which is which and what's connecting with the turn of the key.

Thanks and Rep Appreciated!
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
LFord FORD MONDEO VBF files rasmoka 1 126 20-02-2024, 18:06 PM
Last Post: fordmidabil
  Ford Mondeo mk5 RF Transmitter canisha 0 130 03-10-2023, 20:45 PM
Last Post: canisha
LFord Need update soft for TCM Ford F150 2010 year dfb 1 296 01-08-2023, 21:13 PM
Last Post: Autotronixx
LFord Ford Mondeo service history teka2 0 262 29-05-2023, 13:57 PM
Last Post: teka2
  FORD FIESTA VI 1.6 TDCI (95HP) no start emifive 10 808 21-02-2023, 07:54 AM
Last Post: Tracshan
  Ford Mondeo Mk4 1.6 TDCi 2013 year problem with HS CAN karmazyn 3 360 20-01-2023, 09:12 AM
Last Post: KeeleyKaayz
LFord Ford Focus 2.0 Tdci Sid206 2009 need help Patuk 0 202 11-12-2022, 14:31 PM
Last Post: Patuk
LFord Ford Mondeo Update needed 2.2 TDCI 175HP Carremapper 0 274 10-07-2022, 13:35 PM
Last Post: Carremapper
  Ford Mondeo MK3 used PCM renew alexturbo 2 424 04-06-2022, 09:09 AM
Last Post: alexturbo
LFord Mondeo 1.8 CHBA 2007 Kaja 0 323 25-05-2022, 11:59 AM
Last Post: Kaja

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content