Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CBS - brakes 255% E9x
22-01-2022, 12:57 PM,
Post: #1
|
|||
|
|||
CBS - brakes 255% E9x
Hi all
A strange problem. E92 M3 - 2012, looses power when reset of brake Pads by Kombi (new BMW wear indicators fitted, 2 in front & 1 in back) After that, reset can't be performed on brake Pads. When I check the car with ISTA, CBS says 255% for both front & rear brakes. I'm not able to reset them to 100% ? Front brake is OK with 40.000 KM for example - but still at 255%. When reading from Tool32 - DSC_87.prg - mileage is -32768 KM for both. 2 errors is in DSC module with the overdue Brakepad mileage. 5DE0 5DE1 I've thied this: Open up Tool32.exe (in the C:\EDIABAS\BIN folder). Open File (or just press F3) 'DSC_87.PRG' (in the ECU folder). In the left Column, under Jobs, choose CBS_RESET. To reset Front brake pad sensors, under center column (Arguments), type: Br_v;100;31;255;255;8000h;Fh;FFh;FFh;00h Click Jobs menu and select Start Job Once Only (or just press F5) To reset Rear brake pad sensors, under center column (Arguments), type: Br_h;100;31;255;255;8000h;Fh;FFh;FFh;00h Click Jobs menu and select Start Job Once Only (or just press F5) That gives an error in Tool32 speechless Tried with ;;;;;8000h;;;;; - for writing only mileage - no luck. Is it a new DSC unit ? Denmark E46 Compact 316 ti | i3 - BEV 07/2014 |
|||
22-01-2022, 13:36 PM,
(This post was last modified: 22-01-2022, 13:42 PM by d3lete.)
Post: #2
|
|||
|
|||
RE: CBS - brakes 255% E9x
try reset with unplugged indicator, then connect again and try.
if it doesnt work update your dsc module. |
|||
22-01-2022, 13:37 PM,
Post: #3
|
|||
|
|||
RE: CBS - brakes 255% E9x
Have you tried to update DSC?
|
|||
22-01-2022, 14:25 PM,
Post: #4
|
|||
|
|||
RE: CBS - brakes 255% E9x
Will try with disconnected wear indicators.
Some say,- that a resistence of LESS than 1 Ohm should be in a new OK indicator. And you should try with wire jumper. Haven't programmed it - yet. New indicators from BMW has been ordered Denmark E46 Compact 316 ti | i3 - BEV 07/2014 |
|||
22-01-2022, 15:27 PM,
Post: #5
|
|||
|
|||
RE: CBS - brakes 255% E9x
Been here before, you need to follow the other CBS correction vehicle data and enter the pad thickness.
|
|||
22-01-2022, 23:35 PM,
Post: #6
|
|||
|
|||
RE: CBS - brakes 255% E9x
add +KCBS to VO, manually program DSC, calibrate dsc sensors and encode vehicle. try to reset
|
|||
23-01-2022, 07:03 AM,
Post: #7
|
|||
|
|||
RE: CBS - brakes 255% E9x
Hi, sometimes it is necessary to reset the KOMBI software via the service menu or diagnostics in order to be able to reset the wear indication. Technical Note: On some vehicles, the parking brake must not be applied to allow service intervals to be reset
|
|||
Reputation: +1 - al70 [+1] | |||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Solved ✔ LAN port brakes connection every few seconds with ICOM | Matthew53 | 8 | 992 |
23-07-2022, 11:40 AM Last Post: Matthew53 |
|
M performance brakes 19" 395x36 code | luntik | 6 | 1,516 |
05-06-2018, 11:53 AM Last Post: simonchs |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content