[morto]

Hello everyone, friend of mine bought a car E90 2007 with fitted aftermarket immobiliser, fitted by previous owner for more security. When use ISTA and Inpa the car respond and we can read error memory, but when tried to do some custom coding with NCS, the program read the car vin and get the FA FAHLER. We tried read from CAS or FRM without success.  What is the solution he have to remove this device or there is other option? Thanks.

[BMWzone]

it usually happens due to Autel, I don't know if it is due to bad use of operator or because it has a bug.
Need to upload with NCS ssd file info CAS and write in FRM

[bmw335coding]

Hello everyone, friend of mine bought a car E90 2007 with fitted aftermarket immobiliser, fitted by previous owner for more security. When use ISTA and Inpa the car respond and we can read error memory, but when tried to do some custom coding with NCS, the program read the car vin and get the FA FAHLER. We tried read from CAS or FRM without success.  What is the solution he have to remove this device or there is other option? Thanks.

As BMWzone says, create .ssd file (i know only a manual way / get vo from any only decoder and replace vo codes, typecode, batterycode, builddate and so one an existing .ssd file for get correct format).

[BMWzone]

post long VIN, and I make your ssd file

[jaki]

Have this car been replaced battery with different capacity AND done that with Autocom?
There was a bug in Autocom, that it wrote garbage VO's in CAS when chagening battery capacity or type.
Only NCS can solve this = clean VO in order.

[morto]

Thanks for the help, job done.