Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Faulty ICOM vehicle connection after firmware update
03-02-2022, 11:01 AM,
Post: #1
Faulty ICOM vehicle connection after firmware update
Hello guys, the problem starts after icom-next firmware update. I can use all functions exept programming. I use 3 original icom-next on different laptops, all same version 4.31.16. I try online ISTA with same result - all working exept programing.  Firmware version is 3-15-08. All working wireless without problems. Any hints?
Quote this message in a reply
03-02-2022, 11:43 AM,
Post: #2
RE: Faulty ICOM vehicle connection after firmware update
Programming does not work via wifi!

Vojnó
Press Thanks and reputation under if this post helped you. 
Quote this message in a reply
[+] 1 user says Thank You to Vojno for this post
03-02-2022, 11:53 AM,
Post: #3
RE: Faulty ICOM vehicle connection after firmware update
Icom next have a bug in new FW, dont use for programming. ( see release note )
You must use icom A or A2 for programming.


Vanos
Press Thanks and Reputation, if my post helped you. under
Quote this message in a reply
03-02-2022, 11:54 AM,
Post: #4
RE: Faulty ICOM vehicle connection after firmware update
(03-02-2022, 11:53 AM)vanos Wrote:  Icom next have a bug in new FW, dont use for programming. ( see release note )
You must use icom A or A2 for programming.
Which FW version ?
Quote this message in a reply
03-02-2022, 11:58 AM,
Post: #5
RE: Faulty ICOM vehicle connection after firmware update
(03-02-2022, 11:54 AM)14TLC Wrote:  
(03-02-2022, 11:53 AM)vanos Wrote:  Icom next have a bug in new FW, dont use for programming. ( see release note )
You must use icom A or A2 for programming.
Which FW version ?


Attached Files Thumbnail(s)
   


Vanos
Press Thanks and Reputation, if my post helped you. under
Quote this message in a reply
03-02-2022, 12:18 PM,
Post: #6
RE: Faulty ICOM vehicle connection after firmware update
In what way it does not work?

On wireless it never worked, ISTA directs you to switch to cable.

The bug mentioned occurs sometimes and it does work until it doesn't, not that it does not work at all.
Quote this message in a reply
03-02-2022, 12:33 PM,
Post: #7
RE: Faulty ICOM vehicle connection after firmware update
(03-02-2022, 12:18 PM)Node Wrote:  The bug mentioned occurs sometimes and it does work until it doesn't, not that it does not work at all.

That is the tricky part. You never know when and on which vehicle will happen and release notes are not quite extensive in details about issues. 
Just recently I did an upgrade on HP4 K42 Motorcycle with that ICOM Next firmware and ISTA/P 3.69. Everything went fine
Quote this message in a reply
03-02-2022, 12:46 PM, (This post was last modified: 03-02-2022, 12:47 PM by Node.)
Post: #8
RE: Faulty ICOM vehicle connection after firmware update
BTW just noticed BMW compass system has a new entry about programming not working at all. They recommend to switch on ignition/PAD first, then connect an ICOM. They also suggest this may be an ICOM hardware issue and are asking for ISTA logs.
Quote this message in a reply
03-02-2022, 12:58 PM,
Post: #9
RE: Faulty ICOM vehicle connection after firmware update
(03-02-2022, 12:46 PM)Node Wrote:  BTW just noticed BMW compass system has a new entry about programming not working at all. They recommend to switch on ignition/PAD first, then connect an ICOM. They also suggest this may be an ICOM hardware issue and are asking for ISTA logs.

That has been my routine since ever.

BTW is there any info about the firmware which was recommended for motorcycles?
Quote this message in a reply
03-02-2022, 13:20 PM, (This post was last modified: 03-02-2022, 13:23 PM by javorkrustev.)
Post: #10
RE: Faulty ICOM vehicle connection after firmware update
(03-02-2022, 11:43 AM)Vojno Wrote:  Programming does not work via wifi!

Iam trying with cable, of coursesmile

I understood in local dealer they have new firmware update - 3-15-09. I will bring them for update
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW F650gs dme/ecu update Liteace 13 140 1 hour ago
Last Post: TheNine90
XZBMW AHL, LWR faulty after headlight replacement on F36 thedafeet 1 14 1 hour ago
Last Post: Mefiuu92
  CCC flash WINKFP ICOM BimmerSLO 8 113 2 hours ago
Last Post: Mefiuu92
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,501 27-03-2024, 10:39 AM
Last Post: MINIGP1610
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,799 27-03-2024, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 140 26-03-2024, 03:04 AM
Last Post: rocdeng
  I020 esys connection issue mcrussell 6 243 25-03-2024, 23:35 PM
Last Post: vanos
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 674 25-03-2024, 08:11 AM
Last Post: Node
  need update & mod VIN from FRM ? ka_rai 7 193 25-03-2024, 01:06 AM
Last Post: armenh7
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,910 24-03-2024, 11:29 AM
Last Post: Twointje

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content