Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
G11/G12 LCI Tail lights coding - CRC problem
10-02-2022, 12:23 PM,
Post: #1
|
|||
|
|||
G11/G12 LCI Tail lights coding - CRC problem
Hi,
I'm looking for solution to FDL code RLM module in G11 LCI. Coding is secured by 16bit crc, any changes in coding made error. log: Caf's werden gesucht Tal wird generiert NCD werden gelesen FDL CAFD-00004744-06.6E.00 signieren. Abarbeitung wird gestartet Read SVT before TAL execution started. Read SVT before TAL execution finished. TAL execution started. ExecutionID=2022/02/10-13:22:44.541 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForCoding started [PROGRESS] [] prepareVehicleForCoding finished [PROGRESS] [RLM - 1A] prepareECUforCoding started [PROGRESS] [RLM - 1A] prepareECUforCoding finished [PROGRESS] [RLM - 1A] authenticateECUforCoding started [PROGRESS] [RLM - 1A] authenticateECUforCoding finished [PROGRESS] [RLM - 1A - cafd_00004744-006_110_000] Transaction type: cdDeploy; Message: TA started [TRANSACTION] MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=RLM_1A_ETHERNET> [DIAGSERVICE] [] job failed with negative response error: code: repeat job description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET severity: ERROR [THROWABLE] [RLM - 1A - cafd_00004744-006_110_000] Transaction type: cdDeploy; Message: TA finished [TRANSACTION] [RLM - 1A] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error: code: repeat job description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET severity: ERROR [WARN] [RLM - 1A] - [Exception - RLM - 1a] job failed with negative response error: code: repeat job description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: RLM_1A_ETHERNET severity: ERROR [RLM - 1A] prepareECUforCoding started [PROGRESS] MCDDiagService<id=230634, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : conditionsNotCorrect, link=RLM_1A_ETHERNET> [DIAGSERVICE] [RLM - 1A] prepareECUforCoding finished [PROGRESS] [RLM - 1A] authenticateECUforCoding started [PROGRESS] [RLM - 1A] ECU Authentication error: seed empty or not available [PROGRESS] [] ECU Authentication error: seed empty or not available [THROWABLE] [RLM - 1A] There was an error during TAL execution, please check the log files. [WARN] [RLM - 1A] There was an error during TAL execution, please check the log files. [WARN] [RLM - 1A] - [Exception - RLM - 1a] ECU Authentication error: seed empty or not available [RLM - 1A] finalizeECUCoding started [PROGRESS] [RLM - 1A] finalizeECUCoding finished [PROGRESS] [] There was an error, please check the log files. [WARN] [] - [Exception - RLM - 1a] ECU Authentication error: seed empty or not available [] finalizeVehicleCoding started [PROGRESS] [] finalizeVehicleCoding finished [PROGRESS] [] finalizeTALExecution started [PROGRESS] [] finalizeTALExecution finished [PROGRESS] TAL execution finished [TAL_EXECUTION_FINISHED] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "16s". [C206] Read SVT after TAL execution started. Read SVT after TAL execution finished. Abarbeitung beendet FSC DEALER
*Repair FSC/Repair Pack *Kafas 2, Kafas 4 MRR SLI FSC,Virgin *MGU Region change FSC *MGU, EVO, EntryEVO CARPLAY with/without telematics *NCD 2.0 Service *HU ID8 JOY region change SFA Whatsapp: +48574180840 |
|||
10-02-2022, 13:09 PM,
Post: #2
|
|||
|
|||
RE: G11/G12 LCI Tail lights coding - CRC problem
What launcher are you using?
EntryNav2, MGU, Evo - carplay with or without ATM, full fsc, component protection and more.
NCD 2.0 secure coding - typeschlussel (typecode) change, region change Press rep & thanks if I you found this useful. PM if you need more help. |
|||
10-02-2022, 13:16 PM,
Post: #3
|
|||
|
|||
RE: G11/G12 LCI Tail lights coding - CRC problem
i'm using esysx
FSC DEALER
*Repair FSC/Repair Pack *Kafas 2, Kafas 4 MRR SLI FSC,Virgin *MGU Region change FSC *MGU, EVO, EntryEVO CARPLAY with/without telematics *NCD 2.0 Service *HU ID8 JOY region change SFA Whatsapp: +48574180840 |
|||
17-09-2023, 09:43 AM,
Post: #4
|
|||
|
|||
RE: G11/G12 LCI Tail lights coding - CRC problem
did You solve this i need code usa lights to work with ece standards after changing red to yellow leds of course problem is brake is working with turn signal after coding outside lights to ece Typeschlussel brake and turn will separate but upper position led disappear
|
|||
18-09-2023, 15:47 PM,
Post: #5
|
|||
|
|||
RE: G11/G12 LCI Tail lights coding - CRC problem
US and EU are different parts, so you should to change them to ECE
Bagum4uK
--------------------------------------------------------------------------------------------------------- Press Thanks and Reputation, if my post helped you. |
|||
18-09-2023, 19:22 PM,
Post: #6
|
|||
|
|||
RE: G11/G12 LCI Tail lights coding - CRC problem
i now that parts number are different but i'm changing red to yellow leds from 2010 in poland there is big market for that type of services but in this car bmw it makes it very difficult
|
|||
21-02-2024, 07:38 AM,
Post: #7
|
|||
|
|||
RE: G11/G12 LCI Tail lights coding - CRC problem
A bit different problem:
Car is JPN G11 from 2015. Only thing I like to code is DRL's (front light) on when in "Auto" light switch and in daylight. Currently there is no lights at all. When it is dark, currently everything is ok. |
|||
21-02-2024, 11:25 AM,
Post: #8
|
|||
|
|||
RE: G11/G12 LCI Tail lights coding - CRC problem
(17-09-2023, 09:43 AM)kklobo Wrote: did You solve this i need code usa lights to work with ece standards after changing red to yellow leds of course problem is brake is working with turn signal after coding outside lights to ece Typeschlussel brake and turn will separate but upper position led disappear is possible to do Did I helped you?
Than please, give me Reputation and Thanks. EntryNav2 - Custom FSC SET for any VIN - Patch REMOTE EntryNav2 - Component Protection remove REMOTE EntryNav2 - Carplay with ATM or withOUT REMOTE 8HP - Clear ISN Remote BMW FSC Repair packs | FSC map codes (normal / Lifetime) Full FSC Set + CarPlay Fullscreen - NBT EVO ID5/6(any software version) EVO iDrive 4 to iDrive 6 FLASH including CarPlay Fullscreen EVO Bootloader FIX / HW4.1 BTLD FIX / VO FIX / REGION CHANGE / BLACK SCREEN FIX / CLEAR V850 KAFAS 2/4 SLI / MGU REGION CHANGE / CARPLAY KAFAS4 Virgin |
|||
21-02-2024, 20:38 PM,
Post: #9
|
|||
|
|||
RE: G11/G12 LCI Tail lights coding - CRC problem
with coding ? or changing wiring?
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bmw F34 trailer hitch coding ? | Cryjack | 2 | 43 |
Yesterday, 20:27 PM Last Post: dumitru.o |
|
F20 LCI2 black panel cluster coding | sqorpius | 10 | 2,072 |
Yesterday, 06:51 AM Last Post: hamzettin |
|
FDL coding BMW Apps | Mugga | 3 | 174 |
26-04-2024, 18:06 PM Last Post: Mugga |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,420 |
26-04-2024, 08:06 AM Last Post: smilo |
|
Coding a F80 M3 race car | PeterY | 10 | 521 |
25-04-2024, 23:32 PM Last Post: Furgus |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 608 |
24-04-2024, 22:47 PM Last Post: Mugga |
|
6wb cluster swap and coding | xMoses | 4 | 249 |
22-04-2024, 19:07 PM Last Post: NikolaIMRS |
|
M performance brake DSC2 SBRE coding | Ckh091020 | 3 | 226 |
22-04-2024, 12:58 PM Last Post: Ckh091020 |
|
pulling both paddles put transmission into neutral coding | tintoverano | 1 | 126 |
22-04-2024, 12:42 PM Last Post: raresh.tazz |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,747 |
22-04-2024, 11:44 AM Last Post: kwat |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content