[apol]

Hi
need help

Peugeot 207 2008year HDI
BSI Valeo 2004 P07-00

ATMEL 25128AN

org 211678km

need 160000


thx

[darek_naprawa]

Hi
need help

Peugeot 207 2008year HDI
BSI Valeo 2004 P07-00

ATEML 25128AN

org 211678km

need 160000


thx

[apol]

Thx

loading and going try

i hope works becouse i need to dissasemble BSI to desolder eeprom


-edit-

works fine thx

in tachosoft mileage 23.1 this BSI is aka type2 but showing 95128

mine was AT25128 inside thats why in confusing

thx for darek_naprawa

[darek_naprawa]

In nyo is better done. Still need to delete the service history

[apol]

Ohhhh thx but to late ((( (maby in future when i know why cannot reprogram with testpoints)
ready soldered and asembled




now the question is why i canot read this eeprom by test point
directly on BSI without desolder this 2 pcb's?

i used to read up-2008 programmer when conected wires apps show me error that on wp-gnd pin3-4 and pin 7-8 are short

desoldered this 2 layers on bsi and removed eeprom soldered to socket and read works without problem
Is need to power up BSI before read? when conecting via wires?

btw
Tachosoft have corected type2 off BSI online with eeprom - 24c128 what is wrong again should be AT25128