Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ 0CW flashing with VCP
13-02-2022, 08:45 AM, (This post was last modified: 15-03-2022, 16:39 PM by loki954.)
Post: #1
ZVW  0CW flashing with VCP
Hi
Did someone got problem with flashing 0CW unit to another software using genuine VCP??
I need reflash used machatronic unit 0CW300041  to flash that will fit to my car VW Golf CLHA with QRK. Old mechatronic is gone and not available.

FL_0CW300047R_5250_OVHJ_sw.frf
while attempting to flash there is an error about preconditions not fullfilled.
Hardware is: 0AM 927 769 E    CU5-072  

Opening:C:\GOLF_DQ200\FL_0CW300047R_5250_OVHJ_sw\FL_0CW300047R_5250_OVHJ_sw.frf ...

Block #0 Len: 1206
Block #1 Len: 1
Block #2 Len: 651151
Block #3 Len: 1
Block #4 Len: 55824
OK !

Reading identyfication ...
0CW300041   EV_TCMDQ200021 001001
Checking programing conditions ...
Error checking programmingPrecoditions: 01
Flashing unit ended with error !
Communication closed ...
Turno of / turn on ingnition.

So i wonder is VCP able to flash unit to software with another unit/SW number??


13-02-2022, 16:19 PM,
Post: #2
RE: 0CW flashing with VCP
The mechatronic is on the bench or it is mounted properly in the car with all systems connected ?
13-02-2022, 20:21 PM,
Post: #3
RE: 0CW flashing with VCP
(13-02-2022, 16:19 PM)asman2vw Wrote:  The mechatronic is on the bench  or it is mounted properly in the car with all systems connected ?
Tried with two mechatronics.

First one is instaled in car and had GEKO online immobilizer and VIN matched, but comes from another VW with 1.4TSI CZCA so thats why there is need to reflash to another SW.

Second one i got on bench and got full connection with VCDS or VCP diagnosis, only Can High and Low connected and +14V from stabilized power supply and GND. Should I connect terminal 15?   as 0CW are waked up with Can
Also this unit on bench is full complete unit dismounted from another VW and been never connected to car so it isn't locked.


15-03-2022, 16:16 PM,
Post: #4
RE: Solved. 0CW flashing with VCP
Problem solved.
The main issue was i was trying to flash software that was dedicated to different hardware generation.
Mounted DQ200_MQB 769K TCU to car, made online immo matching and then ODIS E was able to flash new software with differenrt number needed.
Flashing on bench was unsuccesfull.

In general:
Immobilized unit can be cloned on bench but flashed only in car with immo matched.


[+] 2 users say Thank You to szymonrs for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Audi A3 8V BCM flashing from Index Q to AJ mars2moon 1 110 22-03-2024, 17:23 PM
Last Post: pupu144
  Flashing Gateway? Golf GTI MK7.5 jfim88 17 678 01-03-2024, 16:13 PM
Last Post: jfim88
  Odis flashing sox ____ANGEL___ 9 535 03-02-2024, 16:09 PM
Last Post: ____ANGEL___
ZVW Engine ECU flashing - upgrade and downgrade - help spooky75 11 1,667 17-01-2024, 18:56 PM
Last Post: turzol
  ODIS-E 12.2 SM2 flashing wiechec89 6 1,162 09-05-2023, 15:07 PM
Last Post: wiechec89
ZTAudi Flashing - VAS6154 with ODIS-E 7.2.2 marour 20 9,341 06-02-2023, 22:04 PM
Last Post: isdochegal
  what 6154a clone is good for flashing ecus ?? century-voyager 16 2,099 30-10-2022, 18:50 PM
Last Post: ELMEPRO
  VAS6154A flashing speed david99 10 1,923 01-10-2022, 06:30 AM
Last Post: Dana
  ABS Mk60 software flashing blocked dule-p 1 642 07-05-2022, 23:02 PM
Last Post: hrdinavelikynew
ZVW DQ200 OCW Flashing szymonrs 3 599 15-03-2022, 16:48 PM
Last Post: bigdiez

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content