[abdonete]

HI FRIENDS AFTER UPDATE CASE 3 BMW E70 WITH AUTEL IM608 TO MAKE ISN EGS ADAPT IN CASE I LOST SYNCHRONIZATION CASE DME IS THE CAR DOESN'T START ANYMORE I TRIED TO DO SYNCHRONIZATION IMPOSSIBLE. I KNOW THE CASE AND DEAD AFTER UPGRADE UPDATE ISTA P . I ATTACH YOU THE CAS AND DME FILE IF YOU CAN LOOK TO START THE CAR THANK YOU

[jakubas92]

send team priv i help you

[Alex_Tushino]

send team priv i help you

if cas3 is for this machine , then here is the dump
EDC16c35 eeprom is read with checksum error and ISN there another one for CAS
(CF 52)

1. restore the eeprom cas,
 2. program the cas,
3. reset the ECU EGS,
4. write the isn Dde to the cas. 
5. put the blocks in place and turn on the ignition, the EGS will record itself.

---

send team priv i help you

if cas3 is for this machine , then here is the dump
EDC16c35 eeprom is read with checksum error and ISN there another one for CAS
(CF 52)

1. restore the eeprom cas,
 2. program the cas,
3. reset the ECU EGS,
4. write the isn Dde to the cas. 
5. put the blocks in place and turn on the ignition, the EGS will record itself.

use the Xprog programmer

[abdonete]

first of all thank you for your support alex technico. I wrote the eprom modifies the car does not start any more and the synchronization dme case not possible .eeprom writed by autel programmer

[Alex_Tushino]

use the x-prog 5.55 programmer for the chips and there will be no errors

---

if it is impossible to restore, then you need to take your chip's eeprom and write your data into it

this is good archive cas3 ,but all data :-keys ,isn ,vin.... you need to write your own as an editor.

[abdonete]

I DONT HAVE IDITEUR FOR BMW YOU CANT POST IT THINKS

[Alex_Tushino]

THANK YOU MY FRIENDS TALKING TO YOU ABOUT THE DDE EEPROM OR CASE 3
BECAUSE FOR THE CASE I FLASHED THE CASE WITH THE DUMP YOU SENT ME.
AND FOR THE DDE I DID NOTHING

---

I see YOU WANT TO TALK ABOUT THE DDE TO CORRECT THE CRC IN THE ENGINE COMPUTER

if the cas is damaged, then only the cas unit needs to be repaired and there is no need to break the engine block

[abdonete]

I HAVE AUTEL IM608 I CANNOT MODIFY ISN IN YOUR DUMP CAN SET IN EEPROM MY FRIEND

[rus-bmw]

EDC16c35 eeprom is read with checksum error and ISN there another one

The only error is in your crooked broken free programs.
There is no checksum error in the dump.

[abdonete]

I HAVE DONE WITH AUTEL PROGRAM THE WRITING I DO NOT THINK THERE IS A PROGRAMMING ERROR