Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ WINKFP 2089 ERROR ACC260 6777883 FLASH FAILED
14-02-2022, 06:45 AM,
(This post was last modified: 19-02-2022, 10:34 AM by Clusters.)
Post: #1
|
|||
|
|||
WINKFP 2089 ERROR ACC260 6777883 FLASH FAILED
I am doing an ACC retrofit project and i wanted to program LDM and ACC to have my VIN instead of the donor VIN, so i grabbed my KDCAN cable and winkfp to flash them like what could possibly go wrong. LDM was successfully flashed on the first try without any problem, took about 10 seconds, however, ACC somehow takes way longer and always give a 2089 and 2086 signature check error message after hitting 100%. Now the module is in PROGRAMMING ABORT state. Anyway I can successfully flash this or undo what I've done? This part is extremely hard to find so I need to rescue it. Much appreciation.
[Feb.19, 2022] I solved the problem! An DCAN cable with old firmware was the culprit. I flashed the ATMEGA162 chip on my DCAN cable with Arduino Uno (Any Arduino will do). If anyone bumped into the same problem find solution here: http://blog.obdii365.com/2021/07/09/upda...-firmware/ Huge thank you to @GoNz0- ! |
|||
14-02-2022, 06:49 AM,
Post: #2
|
|||
|
|||
RE: WINKFP ACC260 6777883 FLASH FAILED
Flashing some modules with kdcan is very risky. You can try to get a hold of an ICOM and flash it with that.
| BimmerFiks AS | Instagram | |
|||
14-02-2022, 09:03 AM,
(This post was last modified: 14-02-2022, 12:20 PM by Takummie.)
Post: #3
|
|||
|
|||
RE: WINKFP ACC260 6777883 FLASH FAILED
(14-02-2022, 06:49 AM)SweetBMW Wrote: Flashing some modules with kdcan is very risky. You can try to get a hold of an ICOM and flash it with that. Unfortunately I don't have access to icom but worst case scenario that's my only option... I've ordered a bimmergeek expert dcan cable before this happened and it's on its way. I'll try with this first once it arrives. One thing I don't understand is, acc program data is even smaller than LDM how comes it takes way longer. They are both on PT-CAN |
|||
14-02-2022, 12:14 PM,
(This post was last modified: 14-02-2022, 12:15 PM by GoNz0-.)
Post: #4
|
|||
|
|||
RE: WINKFP ACC260 6777883 FLASH FAILED
(14-02-2022, 09:03 AM)Takummie Wrote:The modded bimmergeek cable will sort it.(14-02-2022, 06:49 AM)SweetBMW Wrote: Flashing some modules with kdcan is very risky. You can try to get a hold of an ICOM and flash it with that. It's well known it brick some modules, I bricked my gear stick doing the SAT retrofit and ended up flashing my existing DCAN. Then I got an ICOM from BMW so it doesn't happen again. |
|||
Reputation: +1 - Takummie [+1] | |||
14-02-2022, 12:18 PM,
(This post was last modified: 14-02-2022, 12:21 PM by Takummie.)
Post: #5
|
|||
|
|||
RE: WINKFP ACC260 6777883 FLASH FAILED
(14-02-2022, 12:14 PM)GoNz0- Wrote:That's a good news to hear.(14-02-2022, 09:03 AM)Takummie Wrote:The modded bimmergeek cable will sort it.(14-02-2022, 06:49 AM)SweetBMW Wrote: Flashing some modules with kdcan is very risky. You can try to get a hold of an ICOM and flash it with that. wdym by saying "modded"? Do I need to do something to it? I still have a lot to learn... I have come cross the term "flash the DCAN cable" several times these days but could not understand. Kind educating me abit about it? Much appreciation. BTW i just noticed I actually purchased the more expensive "expert" cable. Don't know if this helps. |
|||
19-02-2022, 08:45 AM,
Post: #6
|
|||
|
|||
RE: WINKFP ACC260 6777883 FLASH FAILED
(14-02-2022, 12:14 PM)GoNz0- Wrote:Heyyyyyy I flashed my DCAN cable with arduino and winkfp flashed ACC2 successfully on the first try! This is all inspired by you. Thank you so much.(14-02-2022, 09:03 AM)Takummie Wrote:The modded bimmergeek cable will sort it.(14-02-2022, 06:49 AM)SweetBMW Wrote: Flashing some modules with kdcan is very risky. You can try to get a hold of an ICOM and flash it with that. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW F20 ACSM4B internal error | Pedrom92 | 4 | 118 |
21-04-2024, 21:54 PM Last Post: Pedrom92 |
|
Flash CAS 3 for disable ELV | UnFan | 3 | 179 |
19-04-2024, 08:20 AM Last Post: ravager |
|
Need help for an error. | TibeRiuSca | 1 | 72 |
18-04-2024, 05:19 AM Last Post: cipi gutuie |
|
VO code RSE_HIGH_NBT2 error | HU_man | 3 | 161 |
12-04-2024, 07:08 AM Last Post: Node |
|
Flash MPPK software 20D B47 (Esys) | ruben_17non | 5 | 574 |
10-04-2024, 21:38 PM Last Post: ruben_17non |
|
Error by Ista ABL_DIT_AS6100_TRAMODE_RESET | arcelik | 18 | 627 |
08-04-2024, 19:58 PM Last Post: Fatalix |
|
xdrive off with esys without error in dash | dankocg | 14 | 2,867 |
07-04-2024, 08:57 AM Last Post: Fatalix |
|
NBT Evo CAFD missing after coding error | Mugga | 12 | 514 |
05-04-2024, 20:30 PM Last Post: Mugga |
|
Solved ✔ ICOM NEXT Error | bmwcare | 4 | 2,484 |
01-04-2024, 11:34 AM Last Post: ivanp |
|
BMW G8x M3/M4 CSL EGS flash | weby | 22 | 3,640 |
31-03-2024, 19:48 PM Last Post: Erezbmwm |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content