Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

[Req] Parametrization / calibration XML 4G8907468K Audi A6 C7
14-02-2022, 12:51 PM,
Post: #1
ZTAudi  [Req] Parametrization / calibration XML 4G8907468K Audi A6 C7
Some can help with a calibration file.

I am looking for a parameter file for gateway with the number 4G8907468K for Audi a6 c7. 
Via online when replacing the gateway block, the parameters file did not load.
Thanks in advance
Quote this message in a reply
15-02-2022, 06:28 AM,
Post: #2
RE: [Req] Parametrization / calibration XML 4G8907468K Audi A6 C7
For general it is very hard to find. If you have online access, to get a solution you can try a online software update. I don’t have a Service bulletin ready for it, but K must have firmware 0110 as in the flash data there is firmware 0113.

General SVM Update Codes at Audi for Gateway is 19A001,19A002 and try up till 19A008 or till it says unknown code. Hold file ready to place in Odis datflash folder, but don’t place it. If svm Code is not suitable for the gateway it will do nothing and tells you, that this code is not for the ecu. When you don’t place the flash file in datflash it tells you which file he wants and there you can see which file he wants to flash. When 0113 the place it in datflash folder and start flash.

When it works, they put parameters at the end. After that don’t close Odis, and don’t press anything, go directly in

C:\Program Files (x86)\Offboard_Diagnostic_Information_System_Service\configuration\org.eclipse.osgi\bundles\114\data\dms2\

or

C:\ProgramData\Offboard_Diagnostic_Information_System_Service\configuration\org.eclipse.osgi\bundles\114\data\dms2\

and there will be a xml file. Save this one and you also have parameters for next use on other car. Now you can press through till the end.

If my answer helped to fix anything, then don't forget to give me some rep please! 
Quote this message in a reply
[+] 2 users say Thank You to PopDog for this post
15-02-2022, 13:16 PM, (This post was last modified: 15-02-2022, 13:28 PM by SergeusRUS.)
Post: #3
RE: [Req] Parametrization / calibration XML 4G8907468K Audi A6 C7
Yes, Gateway 4G8907468K has software with the number 0110. I tried with SVM code XCHG19A001. I will try with other codes. Thanks for the information.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi Audi A6 2024 seat belt warning deactivate with odis samiralena 3 105 3 hours ago
Last Post: samiralena
  Audi A3 8V BCM flashing from Index Q to AJ mars2moon 1 59 22-03-2024, 17:23 PM
Last Post: pupu144
ZTAudi Audi Dataset editor - Required ahmedmph 3 213 22-03-2024, 11:06 AM
Last Post: PopDog
  Audi A6 3.0 TDI 313hp ECU and TCU flash new version without dieselgate AK_Service 7 263 20-03-2024, 11:56 AM
Last Post: AK_Service
ZTAudi Audi DQ500 Abu Ameer 1 72 19-03-2024, 16:33 PM
Last Post: pupu144
ZTAudi Audi a7 c8 zFAS 291 flash help tomtomek 5 119 19-03-2024, 10:47 AM
Last Post: tomtomek
ZTAudi Audi A7 Instrument Cluster CP Removal ahmedmph 0 98 09-03-2024, 08:03 AM
Last Post: ahmedmph
  AUDI G85 REPAIR rasmoka 1 88 07-03-2024, 14:35 PM
Last Post: rasmoka
  Audi A6 3.0 tony1968 3 86 07-03-2024, 08:22 AM
Last Post: pupu144
  Audi A6 C7 P2146 matuuu 4 117 05-03-2024, 16:05 PM
Last Post: matuuu

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content