[AlvinGGG]

hi everyone,
have some questions about enable GFHB function on the G82 with 5AZ laser headlights

I got the car in Australia which should be ECE spec already. I've checked there's no 5AP in the VO, only 5AC which is high beam assistant.
based on what i know, ECE sepc car with no 5AP should have GFHB from factory, however what happened is the car did have auto high beam, the high beam will turn on if there's no car at the front or incoming car, and high beam fully off when there's a car shows up. 
i've also checked c_HBA, C_AFS and C_GFHB are and related options all enabled, LUT_FLC_FORWORDLIGHTING_Y all value changed to 9C, but there's just no tunnel effect at all. 
also based on some posts in bimmerfest, in KAFAS4 40F9, i couldn't find any C_FLA options to make is more sensitive at all. 
i'm wondering if there's some coding differences between G20 laser lights and G22 laser lights as they did look a bit different?

I tried to remove 5AC HBA from VO coding then the HBA compeletely no workingtears

any ideas or any one have successfully coded GFHB function?

[masa52]

for 5AC you need FSC. check your fsc status as sometimes when programing kafas fsc need reload again