[MTDJanusz]

Hello

This is the Scania Diagnos & Programmer 3 2.50.1 with activator and fix.

Instruction how install, is in Activator folder.

When someone have problem Program scan crash, by beginnig of the scan of SDP3 then replice the files from Fix 2.50.1 - Carfix.rar.

Please Thanks and reputation.

[miler80]

I have problem with KEY "No valid key could be found. To start SDP3 with limited functionality, select the Without key option. For troubleshooting or demo mode, a valid software key must be installed. Select the Software key option or use a USB key and select the USB key option." What to do, I instaled on windows x64 with VCI3 according to the instructions?

[MTDJanusz]

You don't have createted a license for your comupter or you created it wrong. Had the same problem by begin. You must copy the HW Id to Protection REG aplication. Than click Decode Fingeprint. Change the end date for 2025. And Generate. The generated REG file you will se in Activator folder you must click on ti and accept. Then restart computer and follow the steps in Instruction.

[lirunchang98]

Hello, after successful activation, the sdp3 software is prompted to stop working during the process of vehicle diagnosis. Is there such a problem

[martin122]

and here's something new, complete with no password


SDP3 2.59.3

[ninjahwdp]

and here's something new, complete with no password


SDP3 2.59.3

Hello Everyone,

Does anybody sucfully lanuched SDP 2.59.3 ? I have problem, cause after doing everhing, during connections with car (SOPS checking), the apllication exit. Any solution?

[maxs30]

and here's something new, complete with no password


SDP3 2.59.3

Hello Everyone,

Does anybody sucfully lanuched SDP 2.59.3 ? I have problem, cause after doing everhing, during connections with car (SOPS checking), the apllication exit. Any solution?

i try to. Same problem