Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ista-p 69.0.200 coapi 1080 error during coding
19-02-2022, 18:30 PM,
Post: #1
|
|||
|
|||
ista-p 69.0.200 coapi 1080 error during coding
hi
all went fine except fo one module and the car is OK it happened to me earlier, but that time istap-p repeated the coding itself and went through for the module in question thanks |
|||
19-02-2022, 19:21 PM,
Post: #2
|
|||
|
|||
RE: ista-p 69.0.200 coapi 1080 error during coding
You can try this, Disconnect the all diagnostic equipment from the vehicle – Perform a battery reset for 15 minutes – Wait at least 10 seconds before reconnecting.
|
|||
24-02-2022, 05:59 AM,
Post: #3
|
|||
|
|||
RE: ista-p 69.0.200 coapi 1080 error during coding
(19-02-2022, 19:21 PM)Bimmer540 Wrote: You can try this, Disconnect the all diagnostic equipment from the vehicle – Perform a battery reset for 15 minutes – Wait at least 10 seconds before reconnecting.yeah, sounds good, thanks since there were no further errors I didn't attempt anything else |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content