Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
e90 M57 dead dde after welding
20-02-2022, 13:23 PM,
Post: #1
|
|||
|
|||
e90 M57 dead dde after welding
Hi, i have e90 m57 after welding, no communication with dde - supply voltage 2,5v. Everything unplugged from the engine (Turbo serwomotor is burned). With unplugged dde supply voltage is 12v, with plugged voltage drop to 2,5v ( even if i connect only supply pins). Wiring harness looks ok, i try with unplugged cas, gas pedal etc. 3 diffrent dde and always 2.5v. What i missed?
|
|||
20-02-2022, 13:26 PM,
(This post was last modified: 20-02-2022, 13:27 PM by Node.)
Post: #2
|
|||
|
|||
RE: e90 M57 dead dde after welding
You missed corroded/damaged connection. Or almost burnt fuse. Or some other damage in the DDE power wire (potentially ground wire, depending on where you are measuring those 2.5V) having higher resistance and causing voltage drop under load.
|
|||
20-02-2022, 13:29 PM,
Post: #3
|
|||
|
|||
RE: e90 M57 dead dde after welding
(20-02-2022, 13:26 PM)Node Wrote: You missed corroded/damaged connection. Or almost burnt fuse. Or some other damage in the DDE power wire (potentially ground wire, depending on where you are measuring those 2.5V) having higher resistance and causing voltage drop under load.Ground wire is ok, cable from jbe is also ok |
|||
20-02-2022, 13:33 PM,
(This post was last modified: 20-02-2022, 13:36 PM by Node.)
Post: #4
|
|||
|
|||
RE: e90 M57 dead dde after welding
Then measure voltage on JBE. Then along wires and find where exactly it drops. Though AFAIR voltage to DDE does not go through JBE on M57.
|
|||
20-02-2022, 19:08 PM,
(This post was last modified: 20-02-2022, 19:09 PM by DNK76.)
Post: #5
|
|||
|
|||
RE: e90 M57 dead dde after welding
Zasilanie E90 2006 r DDE6 M57
If my post helped you hit the thanks and reputation button!
|
|||
20-02-2022, 19:44 PM,
Post: #6
|
|||
|
|||
RE: e90 M57 dead dde after welding
on battery (positve side) car you have a distributor the complete part has fuses in it i think it ist broken had the same issue, you can give on dde direct positive the you know if your dde is burnt or not, just take jumpstart point + and wire it to dde for checking
|
|||
25-02-2022, 12:04 PM,
Post: #7
|
|||
|
|||
RE: e90 M57 dead dde after welding
Sometimes the oxygen sensor gets punctured during welding, remove the connector will be clear or the suppressor in the ECU
|
|||
28-02-2022, 07:03 AM,
Post: #8
|
|||
|
|||
RE: e90 M57 dead dde after welding
check grounds and power at the DME first, then work your ways towards the battery
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
F48 BDC_Gw dead | qbek90 | 4 | 277 |
30-03-2024, 04:22 AM Last Post: qbek90 |
|
ZGW2 dead can be rescued? | walkernight88 | 5 | 370 |
16-03-2024, 21:15 PM Last Post: walkernight88 |
|
EVO dead after flashing | laso | 17 | 2,209 |
22-09-2023, 17:43 PM Last Post: diagso |
|
BMW F20 FEM dead / how to repair? | bmw335coding | 0 | 282 |
20-08-2023, 15:30 PM Last Post: bmw335coding |
|
CIC HDD dead | mariel | 16 | 2,607 |
01-04-2023, 21:05 PM Last Post: zero9 |
|
BMW 330e (G20) Dead | ajpds | 5 | 664 |
22-01-2023, 02:34 AM Last Post: SweetBMW |
|
ESYSX dead licence | Wojti77 | 26 | 2,293 |
15-01-2023, 13:38 PM Last Post: Gimmy1983 |
|
NBT EVO dead after running feature installer | egoy936 | 13 | 1,901 |
23-10-2022, 12:15 PM Last Post: jararak |
|
cas 3 dead after flesh help | jakubas92 | 2 | 390 |
05-10-2022, 19:16 PM Last Post: bikej78 |
|
F20 114d dead DDE | bm92 | 5 | 820 |
13-09-2022, 18:20 PM Last Post: bm92 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content