[relly_boy]

hello mates..

anyone can help me for a solution on this please..

2000 MB SLK320
W170/R170 BODY
112 ENGINE(ME2.8)

WDB1704652F293679

car was flooded..
already replaced engine(used engine)
customer brought ecu(used ecu), immobilizer without the key and all electrical parts..
ecu and immo was not sync because it came from different car(all slkr170)

my first solution is to make the ecu virgin, make a transponder chip by the immo dump and sync the ecu to the immobilizer..
but still start error and i found out that immo did not recognized the key i made..
key was made by reading immo by xprog and make key by gambit(by mask)
but still if i do check actual values by DAS(sdconnect) immo does'nt recognize the key i made so i can't do sync the ecu..
immo is good via comm with das, transponder coil is good also.. but immo does not recognize the key..

my second option is to do immo bypass(julie emmulator) but carlabimmo manual says immo must be working fine and my ecu part number was not on the list supported by julie emmulator..

third option is to do immo off but i didn't find any immo off solution even on internet..

anyone here can help me on this please..
im willing to pay of course..

thank you..

[killerghost]

post your files to check and repair if necessary

[relly_boy]

post your files to check and repair if necessary

here are the files..

thank you,..

[lupu_sandu]

Buy Julie emulator and make immo off like in this video

[relly_boy]

Buy Julie emulator and make immo off like in this video

thank you.. but julie emulator does not support this ecu.. although same me2.8 but julie emulator manual says it will work only for ecu part number listed on the manual.. my ecu pasrt number here was not on the list..
i also try using th julie emulator, follow the manual and those posted on youtube but won't work

[raffy haddad]

Try make key with good tool
Regards

[relly_boy]

Try make key with good tool
Regards

what tool do you recommend to fix this thing..

thank you.. regards