[ivannw]

Hi guys,

I need to clear the old vin in the attached dump file. 

I found it on 3 lines FFA, 11B4 and 1A40. but I could not find the long vin, only short vin.

The dump was taken with yanhua tool and 6wa black is from a X2.

[RuleNormaliai]

there is not always a long vin in 35128.

[ivannw]

Thanks RuleNormaliai! It worked.

I wrote the dump with cleared vin to the yanhua emulator and the 6wa worked like a charm.

Today I tried to open the car but no signal.. the battery dained completely after the install.

Have you experienced something like this before?

[gfriedrichi]

Thanks RuleNormaliai! It worked.

I wrote the dump with cleared vin to the yanhua emulator and the 6wa worked like a charm.

Today I tried to open the car but no signal.. the battery dained completely after the install.

Have you experienced something like this before?

Car has any fault as borne 15wp ?
If so probably kombi is not letting car sleep and it will drain the battery

[Fatalix]

Ive had a kombi replaced once where a F48 drained the battery in 24 hours sporadic. Replaced kombi and all was ok after. Original standard cluster, no retrofits. Could see high amp draw when kombi fuse was connected, and sleep mode prevented. With fuse out, all was shut down to 0 amp draw during sleep mode.