Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mercedes Vito seat belt warning
07-03-2022, 17:53 PM,
Post: #11
|
|||
|
|||
RE: Mercedes Vito seat belt warning
i think my vediamo is no good for this van, i couldn't find that syster ki639
|
|||
08-03-2022, 07:04 AM,
Post: #12
|
|||
|
|||
RE: Mercedes Vito seat belt warning
(07-03-2022, 17:53 PM)al70 Wrote: i think my vediamo is no good for this van, i couldn't find that syster ki639 You may need ki639 or maybe ki639m, I had both prepared for you, nothing is wrong with your Vediamo, you simply do not have them in your database, then I will send them to you. |
|||
08-03-2022, 07:08 AM,
Post: #13
|
|||
|
|||
RE: Mercedes Vito seat belt warning
Correct gcs, I checked and they're not in my database, I pulled the gong from the cluster and covered the led, I don't suppose you have the pinout to power this cluster up on the bench ?
|
|||
08-03-2022, 07:14 AM,
Post: #14
|
|||
|
|||
RE: Mercedes Vito seat belt warning
(08-03-2022, 07:08 AM)al70 Wrote: Correct gcs, I checked and they're not in my database, I pulled the gong from the cluster and covered the led, I don't suppose you have the pinout to power this cluster up on the bench ? Not right now, in a couple of hours I can provide it to you, depending on the IC variant, you may not need to cover that bulb either. |
|||
08-03-2022, 07:20 AM,
(This post was last modified: 08-03-2022, 07:21 AM by al70.)
Post: #15
|
|||
|
|||
RE: Mercedes Vito seat belt warning
I just need to power it up to make sure the needles are set properly
|
|||
08-03-2022, 09:51 AM,
Post: #16
|
|||
|
|||
RE: Mercedes Vito seat belt warning
(08-03-2022, 07:20 AM)al70 Wrote: I just need to power it up to make sure the needles are set properly Promised is debt, there you have: |