[Mex165]

Your file is damaged..
8P0920982CX
Diesel 6000RPM
160MPH
Micronas

That is all the info i can find in this file..

Try this file or tell me what file you want.
This one has copied IMMO and radio code.

[Adiaudia3]

I have a cluster of uk diesel and I want to put the European scales I can only read 24c32 with ch341 or carprog I don't need radio and immo. thanks
it is made for europe?

[Mex165]

As you don´t give me any information, I cannot help you more..
File is with km/h, yes..
But your file was missing everything, so good luck..

[evg_eni]

As you don´t give me any information, I cannot help you more..
File is with km/h, yes..
But your file was missing everything, so good luck..

Do not waste your time, i send him already european eeprom (with original immo and mileage) modified to work with his flash, but looks like he is scared of breaking the cluster...

[Adiaudia3]

As you don´t give me any information, I cannot help you more..
File is with km/h, yes..
But your file was missing everything, so good luck..

Do not waste your time, i send him already european eeprom (with original immo and mileage) modified to work with his flash, but looks like he is scared of breaking the cluster...

it's not a problem anymore, I was just wondering if carprog reads the clone. why is it so hard i have a uk cluster and i want to do it from europe what information to give i read 24c32
if other information is needed I mount it on the car and try to read it. thx

[Adiaudia3]

I copied from another board in 2C0-2EF. everything I saved per km at that address was written the same way


Not going to translate from Romanian again !


1 : All posts must be in English (any thread/post without English language WILL be deleted)