Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBTEvo ID4 US to ECE Coding
15-03-2022, 14:36 PM,
(This post was last modified: 15-03-2022, 14:38 PM by Bavarian.)
Post: #1
|
|||
|
|||
NBTEvo ID4 US to ECE Coding
Hello together,
I would like to flash and code a F30 with NBTEvo ID4 from Us to Ece. Car was build as US with NBTEvo ID4, wich is still in the car. I uploded a Ece Nav Map for Europe with FSC. Finished and worked. Next step was to code the car to ece with changed FA. Result was error messagen in Esys: "Service WDBI_PLAIN returned a negative response with response code requestOutOfRange" and a screen wich shows "no signal". NBT doesn`t hold CAFD. I tried to code the Evo with original FA back but still same result. Tried to update the Evo (BTLD, SWFL and IBAD) with original FA. ->no luck. FSC are all accepted. Actual screenshot and FSC status from Esys attached. Target should be: IBAD from 2712 to 2710 IBAD from 2714 to 270D SWFL from 2721 to 2723 CAFD with Ece (German) contents NAVD Europe Map 2022-01 (already on the Unit) ad FSC 0xE5 (Laptimer) ad FSC 0x9C (BMW Apps) Could anybody help? Regards Bavarian |