[hrdinavelikynew]

Have you all in pm...but without any feedback.

[ALeXXBody]

Have you all in pm...but without any feedback.

Like i said in the previous message, give me more info! What unit it is? train, software. what is the problem? what did you do so far? etc.
I am happy to help but not with this demanding attitude.

But this become offtopic and i'm going to stop it here.

[ALeXXBody]

As an update, the file from @DukeFawks is not working for me. Unit is booting and working fine but i was unable to update V850,.

I tried a force update V850 and after that the unit keeps rebooting. So i put the old backup in order to make the unit work again

I've made a guide for programming V850 after replacement. Is free for all.

[DukeFawks]

My file did not work because the Bolo is from a "Muster" unit from 2013. They have different PCB layout. It was just meant as a template so you could see how the flash was arranged compared to the update files. Bolo is simply at 0x0 but App needs some cut/paste work. Unit will boot with just the Bolo and then you can manually flash the App with mib2_ioc_flash.

[ALeXXBody]

My file did not work because the Bolo is from a "Muster" unit from 2013. They have different PCB layout. It was just meant as a template so you could see how the flash was arranged compared to the update files. Bolo is simply at 0x0 but App needs some cut/paste work. Unit will boot with just the Bolo and then you can manually flash the App with mib2_ioc_flash.

I'm not saying your file is wrong or something. Just that it didn't help my case.

[ALeXXBody]

Does anyone knows any info about this error and how to fix it?

VCTool:
00060A (B200046), Confirmed Faulty control module Control module faulty, EEPROM error
VCDS:
1546 - Internal Control Module Memory Check Sum Error
B2000 46 [008] - Calibration/Parameter Memory Failure

All (readable) data from EEPROM chip dump seems to be ok.

[DukeFawks]

Is this still that unit with the fried IOC you replaced?

[ALeXXBody]

Yes it is. I'm trying to repair this unit for me to fit it in my car. I don't offer repair service for others.

[Crash-100]

Does anyone knows any info about this error and how to fix it?

VCTool:
00060A (B200046), Confirmed Faulty control module Control module faulty, EEPROM error
VCDS:
1546 - Internal Control Module Memory Check Sum Error
         B2000 46 [008] - Calibration/Parameter Memory Failure

All (readable) data from EEPROM chip dump seems to be ok.

Part of eeprom cryped with 16byte from V850 .

[ALeXXBody]

Does anyone knows any info about this error and how to fix it?

VCTool:
00060A (B200046), Confirmed Faulty control module Control module faulty, EEPROM error
VCDS:
1546 - Internal Control Module Memory Check Sum Error
         B2000 46 [008] - Calibration/Parameter Memory Failure

All (readable) data from EEPROM chip dump seems to be ok.

Part of eeprom cryped with 16byte from V850 .

Do you know how to repair this?