Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

G30 540xi change serviceintervall
24-03-2022, 06:41 AM,
Post: #1
G30 540xi change serviceintervall
Hi,

i would like to change the service from 15k / 12mon to 30k / 24mon (US -> ECE)

So i changed VO 8KL to 8KA and JE73 to JB51.

After resetting oil service, it's still 12mon.

I read the DKOMBI2 coding an saw, that "CBS_INT_ZEIT_FZGCHK_INTERN" is still "12_monate" and the activation condition is true(), so it is 12_monate... no matter what the VO says.

The CAFD is: CAFD_00002660_009_001_018

So i think US cars have another DKOMB2 software than ECE cars.

Maybe some with a G30 (preferably a 540i) can post his ncd from cluster and DME, so i can compare.

Thanks a lot!
Quote this message in a reply
25-03-2022, 06:49 AM,
Post: #2
RE: G30 540xi change serviceintervall
Easiest way to change it is with Ista if the car is in stock condition.
Quote this message in a reply
25-03-2022, 10:56 AM,
Post: #3
RE: G30 540xi change serviceintervall
You changed the VO, but hopefully you also coded the correspending ECUs?
Quote this message in a reply
25-03-2022, 11:26 AM, (This post was last modified: 25-03-2022, 11:26 AM by maninblack.)
Post: #4
RE: G30 540xi change serviceintervall
yes sure, i codes kombi, dme and nbt.

are u sure it's possible to do with ista, without coding with esys and change vo?
Quote this message in a reply
25-03-2022, 11:35 AM,
Post: #5
RE: G30 540xi change serviceintervall
sometimes coding does not take in DME on older vehicles with MEVD etc. Sometimes need manually change. Have you tried programming DME and then recode complete vehicle?


Quote this message in a reply
25-03-2022, 11:37 AM, (This post was last modified: 25-03-2022, 11:37 AM by Node.)
Post: #6
RE: G30 540xi change serviceintervall
It is usually possible with ISTA. Just go to a retrofit (coding only) and all what is needed will be done.
Quote this message in a reply
28-03-2022, 19:37 PM,
Post: #7
RE: G30 540xi change serviceintervall
No i didn't flash anything. I just coded via esys.
I'll give it a try with ista
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW e39 530d 2001 problem after MAF change boweld11 3 106 24-03-2024, 22:44 PM
Last Post: SkeYT
  [Question] Change X1 F48 gearbox jaramillo 9 1,373 24-03-2024, 21:27 PM
Last Post: masa52
XZBMW How to change VIN code in VCM via Esys? vipsha 5 1,337 14-03-2024, 22:20 PM
Last Post: tcp443
XZBMW FLM change TomSab 0 75 12-03-2024, 19:17 PM
Last Post: TomSab
  F48 CID change qbek90 0 89 10-03-2024, 09:13 AM
Last Post: qbek90
  Change NBT Evo iDrive 6 Lite Main Menu Car Widget bradsm87 6 470 07-03-2024, 06:23 AM
Last Post: RuleNormaliai
XZBMW Lane change warning, front left slave not installed MrM10 2 107 29-02-2024, 12:40 PM
Last Post: MrM10
  cas2 change vin JaVlk 29 959 27-02-2024, 18:02 PM
Last Post: JaVlk
XZBMW F30 B48 power class change dominpl 1 165 26-02-2024, 18:05 PM
Last Post: ben1978
  BMW F25 screen change m4rrtin 1 140 25-02-2024, 19:36 PM
Last Post: Bakica

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content