Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
XentryConnect C5 setup with Xentry Diagnosis OpenShell
16-04-2022, 19:44 PM,
Post: #1
|
|||
|
|||
XentryConnect C5 setup with Xentry Diagnosis OpenShell
Hello guys,
I bought XentryConnect C5 and would like to setup it with Xentry Diagnosis OpenShell. It is possible to make it work somehow? I tried but Xentry cannot find device on direct LAN connection or through network router. Can someone help me with it? Thank you in advance. PS. I installed latest version Xentry Diagnosis Open Shell. |
|||
16-04-2022, 21:05 PM,
Post: #2
|
|||
|
|||
RE: XentryConnect C5 setup with Xentry Diagnosis OpenShell
For this you need xentry connect software.. last version was 06.2020!
Vediamo & DTS all version
eCOM with Xentry all version XENTRY Connect kit2/kit3 support |
|||
18-04-2022, 07:58 AM,
Post: #3
|
|||
|
|||
RE: XentryConnect C5 setup with Xentry Diagnosis OpenShell
setup Lan IPv4 for ethernet: 172.29.127.119
|
|||
18-04-2022, 08:44 AM,
Post: #4
|
|||
|
|||
RE: XentryConnect C5 setup with Xentry Diagnosis OpenShell
We need to make clear for everybody, we talk about oryginal c5 or c4 in case of c5 ?
Original need xentry connect software and the best is to use win7 due to adhoc connection avability. As mentioned, last update is 6.2020. And it us internal system there. Nothing common with xdos. If you talk about c4 in c5 case, I guess lan ip fixing should work. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content