Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Problem with ISTA-P and ICOM Next on Win 10
30-03-2022, 17:30 PM,
(This post was last modified: 30-03-2022, 23:16 PM by Clusters.)
Post: #1
|
|||
|
|||
Problem with ISTA-P and ICOM Next on Win 10
Hi guys,
I have a problem with ISTA-P: After selecting the ICOM Next in ISTA-P I can connect to the vehicle (BMW motorbike). ISTA-P shows VIN and model, then it askes whether any ECUs were replaced. After that ISTA-P shows milage, type code, color code, I-level, options and so on, but then I get this error message: "The interface is in an invalid state. The session must be ended" The PC runs on Windows 10 64-bit 21H2. The interface is an original ICOM Next with firmware 03.15.08. I tried these two combinations: - ISTA-P standalone 3.66 with ISTA-P Loader 6.4 - ISTA-P standalone 3.69 with ISTA-P Loader 6.6 but the problem is the same. Further there is ISTA+ 4.33.30 standalone on the PC, this works fine with this ICOM Next. Previously the PC was running on Windows 7 and it worked perfectly with ISTA-P 3.66 + ISTA-P Loader 6.4 (but with an older formware of the ICOM Next). Any suggestions or ideas would be great. Thanks! |
|||
30-03-2022, 17:42 PM,
(This post was last modified: 30-03-2022, 17:44 PM by BMWF750GS.)
Post: #2
|
|||
|
|||
RE: Problem with ISTA-P and ICOM Next on Win 10
Re-install ediabas in ISTA-P Loader 6.6
When ISTA-P Loader 6.6 starts, there is a "tool" option with the install "ediabas" option, click on it |
|||
30-03-2022, 18:08 PM,
Post: #3
|
|||
|
|||
RE: Problem with ISTA-P and ICOM Next on Win 10
Thank you for your help!
I did reinstall patched ediabas via Tools-menu in ISTA-P Loder 6.6 (deinstall - reboot - installed it again - reboot). Unfortunately the problem is the same ("interface in invalid state")... |
|||
30-03-2022, 19:08 PM,
Post: #4
|
|||
|
|||
RE: Problem with ISTA-P and ICOM Next on Win 10
Meanwhile I installed ISTA-P 3.69.0.400 (installer version) - the problem is still the same...
|
|||
30-03-2022, 19:14 PM,
(This post was last modified: 30-03-2022, 19:16 PM by bmchicago.)
Post: #5
|
|||
|
|||
RE: Problem with ISTA-P and ICOM Next on Win 10
installed patched Ediabas7.3? usually this is the cause. also make sure your firewall is off
|
|||
30-03-2022, 19:51 PM,
(This post was last modified: 30-03-2022, 19:52 PM by david357.)
Post: #6
|
|||
|
|||
RE: Problem with ISTA-P and ICOM Next on Win 10
Thank you, the firewall was the problem: Firewall was off for private networks but on for public networks. Deactivation the firewall also for public networks solved the problem!
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content