Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Audi 4f mmi problem
31-03-2022, 17:18 PM,
(This post was last modified: 01-04-2022, 22:41 PM by Clusters.)
Post: #1
|
|||
|
|||
Audi 4f mmi problem
Hello friends, I have problem with audi 4f 2006y mmi 2 g... I dont have idea what to check next I need wiring diagram/pinout for control head 4e0035729. Mmi "restarting" on radio every second cut sound and play 2 secs. On cd cannot load nothing but if I change from 1. To 5. It goes back to 1. Track.
Tryed with optic bypass every module same thing always. In gateway with vcds no dtcs but when i try to connect to 07 control head I sometimes can connect to module but cannot read faults, sometimes cannot connect to module. Tryed another control head module same thing... +12 v on two red wires and gnd power is ok I think its CAN fault... Please if somene can give me wiring diagram to check can bus where is comming to 07 module i have 4 green wires on connector and where can goes from control head which pins on gateway. Thanks |
|||
31-03-2022, 19:13 PM,
Post: #2
|
|||
|
|||
RE: Audi 4f mmi problem
I think is Bluetooth software damage issue
|
|||
Reputation: +1 - al70 [+1] | |||
31-03-2022, 20:43 PM,
Post: #3
|
|||
|
|||
RE: Audi 4f mmi problem
|
|||
01-04-2022, 07:46 AM,
Post: #4
|
|||
|
|||
RE: Audi 4f mmi problem
Bluetooth is a separate unit located under the driver's seat. disconnect it use optic bypass.
|
|||
01-04-2022, 07:49 AM,
Post: #5
|
|||
|
|||
RE: Audi 4f mmi problem
bypass the tuner module(optic) left in the trunk
No help for people not give a feedback
|
|||
01-04-2022, 21:26 PM,
Post: #6
|
|||
|
|||
RE: Audi 4f mmi problem
It was problem with second HU today I changed again HU and removed CP now everything is ok. Thanks friends
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content