[cristianchp]

Hello everyone!! Let's see if anyone can help me.. I replaced the mib1 with the mib 2.5 and everything is great works correctly the mib except for the FPA electric driving profiles, after a lot of reading and many headaches and tests people have done what in the GTE have to change the GATEWAY unit since the one that brings the standard car is not compatible with mib2.5 so after reading a lot people change it for the unit with this reference 3Q0907530M. I process to buy the unit and mount it on my vehicle, I remove the protection of components, I encode and adapt everything correctly.. except that the car marks an autonomy error, it tempomat gives an error, and the detection of fatigue, after reading the same they say that to activate those functions you have to go through the dealer to buy the SWAP FSC FEC licenses, of the latter I remember when the mib 2.5 that there were generators on the internet that gave you the codes but you had to put a custom fw to the mib but I don't know if it will be the same With the gateway, at this point they tell me that in order to do so I need either the xml files of the drive 3Q0907530M to do it by odis, or the parameterization files of that drive to do it by VCP, I am at this point blocked.. I don't know if anyone can help me

First of all, thank you very much

[nirvananils]

You have to write more information about car. Did you have AID? Is DCC installed?

[cristianchp]

Hi @nirvananils!!! Thanks for answering.. I'll give you a little about the characteristics of my car:
It is a volkwagen golf GTE model 2015, I do not have AID installed, I have the normal needle box... I do not have DCC installed, I have a normal tempomat, the car had the mib1 high and I put the mib 2.5 on it, in the errors of odis comes out that it needs the data sets of: fatigue detection, tempomat, driving modes and autonomy, it is what is missing from the Gateway.
The Gateway is from a 2018 model, my mistake I think was buying the new Gateway, when it comes new it comes without any parameters loaded..

[cristianchp]

You have to write more information about car. Did you have AID? Is DCC installed?

Hi @nirvananils!!! Thanks for answering.. I'll give you a little about the characteristics of my car:
It is a volkwagen golf GTE model 2015, I do not have AID installed, I have the normal needle box... I do not have DCC installed, I have a normal tempomat, the car had the mib1 high and I put the mib 2.5 on it, in the errors of odis comes out that it needs the data sets of: fatigue detection, tempomat, driving modes and autonomy, it is what is missing from the Gateway.
The Gateway is from a 2018 model, my mistake I think was buying the new Gateway, when it comes new it comes without any parameters loaded..

[nirvananils]

check out this File. It' a GTE Facelift with standard dash and without DCC

[cristianchp]

check out this File. It' a GTE Facelift with standard dash and without DCC

Thank you very much @nirvananils I have already tested the file and we have improved something .. now the autonomy of the hybrid battery works for me. I only need the driving modes... they still don't work, I press the GTE key or the e-mode key, the orange light turns on and off and nothing appears in the box or in the mib 2.5 either, in the failures of The gateway has already disappeared the 3 failures that data set but the fatigue detection and the driving modes still do not work. Apart from the motor unit, it gives me a bad coding error. I attach photos...

first of all @nirvananils thank you very much, could you continue helping me? If necessary I would pay you to solve the problem

[nirvananils]

Coukd you provide full log of car? Will check that after receiving your log. Done same retrofit 2 years ago with a friend

[cristianchp]

Coukd you provide full log of car? Will check that after receiving your log. Done same retrofit 2 years ago with a friend

I just took out the encoding and the errors that come out, how do you see it?

---

Coukd you provide full log of car? Will check that after receiving your log. Done same retrofit 2 years ago with a friend

I better send you the before and after... the before is before changing the gateway and the after is from now when I loaded the data set you sent me

[cristianchp]

I also found this video of VCP but I don't know if it's okay but we can try it, I have VCP, but I don't have the ecu file 3q0907530m

[nirvananils]

It seems they didn't restore SWAP Codes, as Log files says no active FEC in GW