[ProjectBMW]

Hi All,

Trying to code 6WA virginized F20 cluster to 2016 F20.

Coding went fine

Added 6WA and coded cluster with no issues but still not working, also tried to flash it but getting error attached. Any help?

Thanks

[moreply]

You trying to flash at Bench or in Car? Did also Code the other Components in the Car? If FEM doesnt know it has 6WA und ETH Bus i wont know how to adress it for flashing.

[ProjectBMW]

In the car, coded FEM module also, do I need to change I step or production date for flashing?

[mbm1703]

any errors on ista ? check the option - call ecu functions in ista and do some tests on cluster

[Sauron]

Cluster seems offline, interrupting communication

[larshutten]

Had car 6wa from factory? If not did you add most and code hu to enable most? Also is most port available on hu?

[ProjectBMW]

Cluster is online, and can be seen by E-sys BKOMBI2.
Car did't have 6WA option from factory so probably this why not able to code, how to add most bus or where I can look for info?

[Node]

It's online just barely as is in power down mode. To wake it up MOST bus is required. That is an optical bus. Depending on other options of a car it may be there or not. If it is, you will have to redo it to connect to kombi as it's a loop bus. If not, then you need to connect it from the HU. If HU does not have it, you will need a new HU.

[claw]

Cluster is online, and can be seen by E-sys BKOMBI2.
Car did't have 6WA option from factory so probably this why not able to code, how to add most bus or where I can look for info?

Does HU have most port? 
You need to run most cable from kombi to back of HU.