Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

F 10 over 190 errors
03-04-2022, 13:58 PM,
Post: #1
F 10 over 190 errors
Can someone help me out with all those errors


Attached Files Thumbnail(s)
                                                   
Quote this message in a reply
03-04-2022, 14:07 PM,
Post: #2
RE: F 10 over 190 errors
delete fault memory when look that left

BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU

MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way
Best prices PM


Quote this message in a reply
[+] 1 user says Thank You to PsevDo for this post
03-04-2022, 14:08 PM, (This post was last modified: 03-04-2022, 14:09 PM by Node.)
Post: #3
RE: F 10 over 190 errors
What is the history of that car? Is this due to failed flashing attempt or what?

I think you should start with all kinds of initializations as there are faults that MOST is not working. Flexray is not initialized, etc. Initialize Flexray FIRST. All those signal invalid faults will be the results of buses malfunctioning. SZL also reports LIN bus failures. Was something retrofited on that car?
Reputation: +1 - Twointje [+1]
Quote this message in a reply
[+] 2 users say Thank You to Node for this post
04-04-2022, 19:49 PM,
Post: #4
RE: F 10 over 190 errors
(03-04-2022, 14:08 PM)Node Wrote:  What is the history of that car? Is this due to failed flashing attempt or what?

I think you should start with all kinds of initializations as there are faults that MOST is not working. Flexray is not initialized, etc. Initialize Flexray FIRST. All those signal invalid faults will be the results of buses malfunctioning. SZL also reports LIN bus failures. Was something retrofited on that car?

I just orderd ibs AND bsd AND fight now trying to find why in ista abs module is in red
Quote this message in a reply
04-04-2022, 20:34 PM, (This post was last modified: 04-04-2022, 20:34 PM by Enabled.)
Post: #5
RE: F 10 over 190 errors
What kind of interface are you using to communicate to car?

And yes, clear errors first and then read again.

What problems does the car have? Don't treat codes, treat the car as a whole.
Quote this message in a reply
04-04-2022, 20:40 PM,
Post: #6
RE: F 10 over 190 errors
did u check DSC fuse? The car have comfort access? A shorted handle will cause the fuse for the DSC to blow.


Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  EGS X3 E83 CAN ERRORS A-BAYERS 3 243 15-11-2023, 22:10 PM
Last Post: A-BAYERS
XZBMW Message for navigation map errors chang2 0 181 03-10-2023, 18:46 PM
Last Post: chang2
  F20 with SBS errors in memory peppearci 0 355 31-07-2023, 07:20 AM
Last Post: peppearci
XZBMW F30 front signal errors hero3838 2 287 17-06-2023, 20:54 PM
Last Post: Siki78
XZBMW BMW F10/F11 Multiple errors/faults pablito94 10 776 07-06-2023, 06:04 AM
Last Post: zeronoo
XZBMW INPA - reading errors with details kimz 5 509 28-05-2023, 23:09 PM
Last Post: Enabled
XZBMW Initialised Flexray in ISTA+ created DSC & ICM errors S1000RR_Neil 5 705 25-03-2023, 16:27 PM
Last Post: Siki78
  Solved ✔ Erasing errors with ista d killed vtg bmwlover 8 733 06-01-2023, 20:33 PM
Last Post: bmwlover
  Errors comes and after restarting car they hide bmwlover 16 1,227 27-11-2022, 14:41 PM
Last Post: bmwlover
XZBMW E60 airbag light on dash but no errors on ista/inpa claw 12 1,068 03-11-2022, 14:44 PM
Last Post: djdum

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content