[moiloon]

can anyone tell me if its possible to manually place the v17 map files onto the rns h/drive created by mapstool after removal from device,im on josi 5238 firmware, I am having a nightmare, sd card i just get constant sd card error on evey sd card ive tried, around 8 different ones and sizes, and burned multiple dvds of different manufactures, at the recommended low speed and settings ect, tried image burn, nero, discs write and verify fine, i can access the map fat32 partition on the rns510 h/drive plugged into a usb caddy , so would like to know the file structure or such to manual placement of the map, thanks

[asto]

Hi moiloon
i make more RNS510 map but only from dvd and all ok without problem,but every time use me new dvd drive because more dvd drive is bad laser

BR asto

[icardiag]

I think placing the drive to a usb caddy and copy the maps won't work - even if you use the SD card copy, you have to insert the DVD to succesfully finish and confirm the installed maps; same is when using MRMManager to copy the maps from SD card. SetConfig has a feature to set the map copy status to finished even when the maps were not installed completely, but I don't recommend to use it this way.
To be 100% sure everything is correct replace the DVD drive and finish the map update using the DVD. Or find somebody near you who can help with that.

[moiloon]

I think placing the drive to a usb caddy and copy the maps won't work - even if you use the SD card copy, you have to insert the DVD to succesfully finish and confirm the installed maps; same is when using MRMManager to copy the maps from SD card. SetConfig has a feature to set the map copy status to finished even when the maps were not installed completely, but I don't recommend to use it this way.
To be 100% sure everything is correct replace the DVD drive and finish the map update using the DVD. Or find somebody near you who can help with that.

found this info on a eastern european website regarding this, but i obviously cant do as stated, as i dont have the DVD folder structure described that he saved from the rns h/drive prior to copying the maptools built map across to it


Hello everyone. Well, I finally updated the maps to version 8555 and I did it without disks and flashcards. I did the update through the computer, with the removal of the HDD from the RNSki. I bought an adapter for old laptop IDE hards, the most inexpensive for 200p.Next

, I made a backup of the DVD folder from the RNS hard and deleting everything from it, copied all the data from the image of the card disk and all, I did not do any more manipulations, I collected RNSku and Voila I have a card version 8555. Maybe this information will help someone.

[petku-cz]

Last time, when install v17 map from SD I have the same trouble. So I tried to install older map from DVD and it done successfully. Next attempt from SD was successful too.