1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO CHIPS



Solved ✔ Mercedes ML320 AIRBAG
02-02-2020, 21:11 PM, (This post was last modified: 11-02-2020, 18:55 PM by bekiyu.)
Post: #1
Solved ✔ Mercedes ML320 AIRBAG
Hi. I need clear crash from bin
MERCEDES ML320 (2006) W164
ECU BOSCH 0 285 001 993
SW 1006 
HW 3005

Thanks


Attached Files
Mercedes ML320 AirBag Bosch 0285001993.rar
File Type: .rar
Downloaded: 0 times
Size: 1.3 KB

Quote this message in a reply
03-02-2020, 20:11 PM, (This post was last modified: 03-02-2020, 20:45 PM by bekiyu.)
Post: #2
RE: Mercedes ML320 AIRBAG
Problem SOLVED with crash data.

After deleting the CRASH DATA, i can delete most of DTCs in Airbag modul, only 3 DTC left, 

9013 Driver seat belt sensor circut, open circuit or short.
9006 Undervoltage at terminal 30
9600 Control unit, internal error

Restraints data list
-Left window airbag ignition squib                  2.5 Ohm
-Right window airbag ignition squib               2.4 Ohm
-Driver airbag ignition squib 1                        3.0 Ohm
-Driver airbag ignition squib 2                        3.0 Ohm
-Front Passanger airbag ignition squib 1       2.4 Ohm
-Front Passanger airbag ignition squib 2       2.5 Ohm
-Squib circuit knee airbag, driver side        643.4 Ohm 
Tomorrow i will check the "knee airbag error" and wiring, and post results.

Thank you


Attached Files
Mercedes Benz - 0 285 001 993 CLEARED.rar
File Type: .rar
Downloaded: 0 times
Size: 1.18 KB

Quote this message in a reply
11-02-2020, 17:29 PM, (This post was last modified: 11-02-2020, 18:54 PM by bekiyu.)
Post: #3
Solved ✔ Mercedes ML320 AIRBAG
Hi.
Finaly i  finished SRS issue on ML320 .
Driver seat belt sensor circut, open circuit or short - it was wire break on tranzition point where wire goes up from the seat to the switch (inner bottom side of seat / outer side of seat)
9006 Undervoltage at terminal 30 and 9600 Control unit, internal error - after solving the wire break on driver seat belt sensor, i deleted the crash data again, and this solved this dtc's.
Finally, in my case the car das't  have "knee airbag on driver side" and i think that this was the reason why diagnostic interface displayed this 643.4 Ohm  resistance on knee airbag.

Best regards.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Help need dump airbag Ford Transit mitch3 4 186 1 hour ago
Last Post: mitch3
LMazda AIRBAG MODULE mazda D09H 57K30 jjservice 1 77 22-02-2020, 23:15 PM
Last Post: code.kuba
  Mitsubishi Outlander Airbag crash clearing needed Marines74 2 92 21-02-2020, 20:32 PM
Last Post: al70
LFord Ford transit airbag KT1T-14B321-AD clear ombra 2 250 20-02-2020, 19:19 PM
Last Post: dragon100
VLexus Lexus RX350 Airbag Lamp Klutch 1 80 20-02-2020, 17:09 PM
Last Post: volavka
0Scope Golf6 5wk44301 airbag need clear adel.nooh 3 123 20-02-2020, 14:00 PM
Last Post: code.kuba
YTMercedes Mercedes W211 used Airbag ECU matzebodensee 1 106 18-02-2020, 04:29 AM
Last Post: mercis
  301 AIRBAG zaidanediag 1 126 17-02-2020, 08:43 AM
Last Post: talk2idris
LFord airbag Ford escape osquitar10 1 159 15-02-2020, 00:54 AM
Last Post: Le-Mans
  Airbag connections RusselP 3 221 14-02-2020, 00:24 AM
Last Post: domelec

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content