Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Harman MIB stuck on logo and reboot
08-04-2022, 18:45 PM,
Post: #11
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
Edit for 70 folder
|
|||
08-04-2022, 18:51 PM,
Post: #12
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
OK, FW modified and ready on SD. Putty connected to pin 3 and 9.
|
|||
08-04-2022, 19:08 PM,
(This post was last modified: 08-04-2022, 19:10 PM by ALeXXBody.)
Post: #13
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
Use the guide to enter IPL mode and the Recovery, password should be: harman_f
Type: stfu to stop system log output But first please share the file metainfo2.txt to make sure the commands are correct. I don't have this firmware and is taking 2 hours to download |
|||
08-04-2022, 19:12 PM,
Post: #14
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
Here is metainfo2.
|
|||
08-04-2022, 19:17 PM,
Post: #15
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
What is the file name in folder /RCC/dsp/21/default ?
|
|||
08-04-2022, 19:20 PM,
Post: #16
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
AUDI_MIB_DSP.bin.bgz
|
|||
08-04-2022, 19:22 PM,
(This post was last modified: 08-04-2022, 19:32 PM by ALeXXBody.)
Post: #17
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
Use the this commands, 1 by 1, and wait for eash one to finish. Without "-" :
- flashunlock - on -f rcc flashit -v -x -d -a 0x00020000 -f /net/mmx/fs/sda0/RCC/ifs-emg/21/default/ifs-emergency.ifs - on -f rcc flashit -v -x -d -a 0x00540000 -f /net/mmx/fs/sda0/RCC/ifs-root/21/default/ifs-root.ifs - on -f rcc flashit -v -x -d -a 0x01D40000 -f /net/mmx/fs/sda0/RCC/efs-system/21/default/efs-system.efs - on -f rcc flashit -v -x -d -a 0x03D00000 -f /net/mmx/fs/sda0/RCC/dsp/21/default/AUDI_MIB_DSP.bin.bgz this will flash RCC part of MIB2. For MMX: - on -f rcc flashit -v -x -d -a 0x760000 -p /net/mmx/dev/fs0 -f /net/mmx/fs/sda0/MMX2/mifs-stage1/70/default/mifs-stage1.img - on -f rcc flashit -v -x -d -a 0x160000 -p /net/mmx/dev/fs0 -f /net/mmx/fs/sda0/MMX2/eifs/50/default/eifs.img - on -f rcc flashit -v -x -d -a 0xA60000 -p /net/mmx/dev/fs0 -f /net/mmx/fs/sda0/MMX2/mifs-stage2/70/default/mifs-stage2.img - on -f rcc flashit -v -x -d -a 0x3600000 -p /net/mmx/dev/fs0 -f /net/mmx/fs/sda0/MMX2/efs-sys/70/default/efs-system.img - cat /net/mmx/fs/sda0/MMX2/app/70/default/app.img > /net/mmx/dev/mnand0t177 After that restart the unit and start a software update form red menu Hope this will help you fix your unit. |
|||
08-04-2022, 19:38 PM,
(This post was last modified: 08-04-2022, 19:50 PM by petku-cz.)
Post: #18
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
After harman_f and next stfu it freeze and putty not responding.
May I skip stfu ? Since I don´t know, what I´m doing, but instead stfu I use slay -9 ... and programming . |
|||
08-04-2022, 20:19 PM,
Post: #19
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
slay -9 MIBEmergency is part of working in IPL mode, will prevent unit from restarting
|
|||
08-04-2022, 20:26 PM,
Post: #20
|
|||
|
|||
RE: Harman MIB stuck on logo and reboot
Finally I have trouble with last command.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content