[alsamaraee]

use F3x FA, because F1x never had EVO, so it will not calculate you ZBE4.

Thank you for answering

Now it is look like that. Just one SWFL and BTLD needed to be flashed. I replaced the

[user_530d]

That's so right.

[alsamaraee]

What am I missing?


Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2022/05/20-21:37:54.101
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
[] prepareVehicleForFlash finished [PROGRESS]
[ZBE4 - 67] prepareECUforFlash started [PROGRESS]
[] SVK-Ist does not match expected SGBMIDs for ecu ECUId:ZBE4_0x67. Excpected (relevant process classes only): [hwap_00002310-255_255_255, btld_000030be-002_011_000, hwel_0000230f-002_001_001], Actual (relevant process classes only): [hwap_00002310-255_255_255, hwel_0000230f-002_001_001, btld_000030be-002_010_000], Missing SGBMID(s): [btld_000030be-002_011_000], Surplus SGBMID(s): [btld_000030be-002_010_000] [THROWABLE]
[ZBE4 - 67] There was an error during TAL execution, please check the log files. [WARN]
[ZBE4 - 67] - [Exception - ZBE4 - 67] SVK-Ist does not match expected SGBMIDs for ecu ECUId:ZBE4_0x67. Excpected (relevant process classes only): [hwap_00002310-255_255_255, btld_000030be-002_011_000, hwel_0000230f-002_001_001], Actual (relevant process classes only): [hwap_00002310-255_255_255, hwel_0000230f-002_001_001, btld_000030be-002_010_000], Missing SGBMID(s): [btld_000030be-002_011_000], Surplus SGBMID(s): [btld_000030be-002_010_000]
[ZBE4 - 67] finalizeECUFlash started [PROGRESS]
[ZBE4 - 67] finalizeECUFlash finished [PROGRESS]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "1min 6s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.

[mbm1703]

Wrong istep shipment , play with your dates and re calculate soll and tall

[laquangksxd]

You need to press the button repeatedly for zbe4 to show up in the e-sys tree with the zgw/fem bench. Then calculate tal and flash with Fa F30 (press button continuously during flash).

[alsamaraee]

You need to press the button repeatedly for zbe4 to show up in the e-sys tree with the zgw/fem bench. Then calculate tal and flash with Fa F30 (press button continuously during flash).

Thank you for helping
Yes I know that already when I have it on the bench
It was my fault. I decided to not flash the btld. That was the problem.
Now it is flashed and works fine. Don't know about the hand writing yet.