Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BimmerUtility vs Esys Launchers
10-04-2022, 00:18 AM,
(This post was last modified: 10-04-2022, 01:14 AM by Rob@BU.)
Post: #21
|
|||
|
|||
RE: BimmerUtility vs Esys Launchers
(09-04-2022, 21:50 PM)jararak Wrote: rob - i have few question Hello, We are currently developing our own Bimmer Utitlity Port Tool. In the meantime, you can use Teamviewer and PortMapper! Attached is where you can download PortMapper. (09-04-2022, 23:06 PM)hulahans Wrote: My Files Tab only shows CAFs from data/CAF folder .It does not show included Folders with cafs inside Naturally, "My Files" only reads from the esys CAF folder, but you can drag an NCD file from any location into the My Files section or FDL editor and it will load it. (09-04-2022, 22:21 PM)luntik Wrote:(08-04-2022, 20:06 PM) Rob@BU Wrote: Please ensure that Esys is closed when performing DTC Read/Clear and FSC STATUS. After 5 to 10 seconds ESYS should release the port and it should work perfectly fine. Likely this is the issue. If not , please PM me.I tried some more times and failed to succeed 1. We will look into the remote connection problem. 2. We can add searching conditional parameters and values to search options. 3. The sorting will take an adjustment, but it has its purpose, I promise. For now alphabetical id the current way. 4. Are you asking to also show the hex value in addition to the name of the value? As of now, value names should show, but we can add their hex value as well. 5. For bdc ambient coding, could you pm us the ncd file and cheat file so we can look into the issue. 6. For hex editing, we are adding a simple copy/paste solution that is coming within the week or so. This will also auto convert vin/longvin values meaning you can paste the longvin in as plain text and we will convert it accordingly. |