[blecko1985]

Hello everyone,


I have a question regarding the PSdZData Full 4.33.31.

With which Esys version does the above PSDZDATA run stable and without crashes?

I am currently using the Esys version 3.30.1. I copied the PSdZData into the respective folders.

Coding  are possible. But as soon as I want to flash a control device and do the TAL calculation, Esys closes automatically.
Furthermore, it does not start anymore! Sometimes it doesn't work.

would be grateful for any tip

[diagso]

Hello everyone,


I have a question regarding the PSdZData Full 4.33.31.

With which Esys version does the above PSDZDATA run stable and without crashes?

I am currently using the Esys version 3.30.1. I copied the PSdZData into the respective folders.

Coding  are possible. But as soon as I want to flash a control device and do the TAL calculation, Esys closes automatically.
Furthermore, it does not start anymore! Sometimes it doesn't work.

would be grateful for any tip

This sounds like you're machine is not having proper specs - how much ram do you have installed ? Do you run 3.30 via launcher ? For TAL execution I would run standard Esys.

Start with installing/updating java for x32 and x64 bit.

[blecko1985]

Hi Diagso, thank you for your reply.

to your question yes i have
Esys version 3.30.1 + launcher V2.8.1
I have 8Gb Ram

Yesterday I re-imported the old data and everything is running again.
but I would like to update the data to Full 4.33.31.

[Bimmer540]

Then you need newer launcher for coding.

Only Esys you can use with newer full data for programming

[davidoff86]

Never program with a launcher !

Just use native esys for tal calculations and executions
3.34 and above all work fine on new data

[blecko1985]

Never program with a launcher !

Just use native esys for tal calculations and executions
3.34 and above all work fine on new data

Hello Davidoff86


Thank you for your help.

I will now install the esys 3.34 a launcher do I need for coding and not flashing?

---

Then you need newer launcher for coding.

Only Esys you can use with newer full data for programming

Hi bimmer540


thanks for your tip. Can you recommend me a current launcher? left

[Bimmer540]

Never program with a launcher !

Just use native esys for tal calculations and executions
3.34 and above all work fine on new data

Hello Davidoff86


Thank you for your help.

I will now install the esys 3.34 a launcher do I need for coding and not flashing?

---

Then you need newer launcher for coding.

Only Esys you can use with newer full data for programming

Hi bimmer540


thanks for your tip. Can you recommend me a current launcher? left

https://cartechnology.co.uk/showthread.php?tid=63050