[margut]

Good day everyone!


As a hobby (for being bored), I installed the Xentry 03.2022, from gcs190 in the forum, in a VMWare with Windows 10 Pro x64 Superlite version successfully without a single installation error after 5 attempts. The virtual disk takes up only around 77Gb of disk space. Longkeys were accepted. What is missing is the FullFix-Xentry-2022 for this to become useful. 

I requested vagtizi for the password to his uploaded fix however I got no response till now. I will share this work with those who have difficulty installing Xentry in their systems. However, I do not have a hosting site that can handle this file size because I simply cannot afford it.

Those who are interested may post their suggestions below on how I can upload and share this file. Also, if possible, include the FullFix for this version so I can patch it before the upload...Thanks

[gcs190]

There you should have everything you need:

https://cartechnology.co.uk/showthread.php?tid=31441

[margut]

There you should have everything you need:

https://cartechnology.co.uk/showthread.php?tid=31441

Thanks for your uploaded Xentry 2022. I followed Pesona's guide however, both XS and x4711 method is not working. I still got the "no access authorization" error. Perhaps the fix vagtizi uploaded, which I do not have at the moment, will work without issues. I cannot confirm it since I did not receive its archive password.

Somebody might be kind enough to share and post here the second version of Xentry-FullFix which has no more issues as claimed...
--------------------------------------------------

April 11, 2022 Update: 

Finally, the program is now activated and is working as expected. I have not tested the program in action because I do not have one of these cars. 

I will post later in another thread the steps of how I did everything on it.