[gundam00]

Hello,

I read my ECU with kess v2, and I need some help to find the immo pin.
Is it possible to find the pin with this dump ? 
If not, can you indicate me what to do, please ?

Thank you 

[volavka]

From flash ? interesting as well 
AFAIK ONLY possible from EEPROM 24c04

Br.V

[mbedv]

Kess cannot read an Eeprom, you need another tool like AVDI, Dashcan or VVDI or just soldering and a programmer like Beeprog or many others

EDC15 - Eeprom 24c04

Pin Code is in address 12E and 12F Invers and Hex to Dec

[lupu_sandu]

Mpps v18 can read eeprom aswell

[gundam00]

Thanks to everyone, as you've seen I was a bit confused with thread like pin from vin, pin from ecu, etc.

I'm a noob 
But now it's better with your help.
So to read this immo eeprom, 2 ways :
- with a chip programmer and soldering
- with an ecu reader that can work in boot mode, and attached like that -> transpondery.com/pinouts/vag/edc15_pinout.html

Is there also a possibility to read this eeprom with a vag k+can line cable ?

[lupu_sandu]

Orcourse. K+can 1.4 can read edc15 eep

[volavka]

Why not get an cheap xprog from aliexpess and learn read/write eeproms  
While you will improve soldering skills  

Cheers mate

Br.V