Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VCP and Steering Assist parameters for 4G0 909 144 G
12-04-2022, 14:27 PM,
Post: #1
|
|||
|
|||
VCP and Steering Assist parameters for 4G0 909 144 G
Hello,
Just received my VCP cable. I used it to flash my 44: Steering Assist, and now I need to upload Parameters, but VCP only offers for "4G0 909 144L" and when I transfer it, i get error, failed. Maybe after Flash I need to Reset all values and Learnings and then transfer parameters? Before I was using Odis E and with Odis all these worked perfect. I'm waiting for VCP answer, but not sure how long it will takes. Maybe I'm doing something wrong. I have following error on my Steering and firmware update fixes it for 1-2 weeks. So I can use car, but yes I plan to visit service. To fix permanently this issue. Code: Address 44: Steering Assist Labels: 4G0-909-144.clb |
|||
13-04-2022, 08:03 AM,
Post: #2
|
|||
|
|||
RE: VCP and Steering Assist parameters for 4G0 909 144 G
You can't use Index L dataset for Index AA Software! You'll need Dataset for this Version
|
|||
13-04-2022, 08:23 AM,
Post: #3
|
|||
|
|||
RE: VCP and Steering Assist parameters for 4G0 909 144 G
It is my second Flash to AA, first time I did it using Odis E and was able to upload "4G0909852H"
Same parameters as was before updating firmware. But now I did flashing using VCP and it not so good as was with ODIS E Now for AA I need to find proper parameters, not old ones? Code: Address 44: Steering Assist |
|||
13-04-2022, 21:34 PM,
Post: #4
|
|||
|
|||
RE: VCP and Steering Assist parameters for 4G0 909 144 G
I think you will have to go back to Odis on 4G0909144L 0010 bottles.
In my opinion AA does not fit to this steering gear. |
|||
14-04-2022, 06:13 AM,
Post: #5
|
|||
|
|||
RE: VCP and Steering Assist parameters for 4G0 909 144 G
I only found TPI 2032205/8, that offers to update it to version 0012 (FL_4G0909144S)
But all forums update it to version 0013. There are confirmation from someone, that he got flashed it by dealer from "4G0909144L 0010" to "4G0909144AA 0013" I'm 100% sure that AA is OK for this, only problem with VCP, it cannot upload parameters for it. I think that I will take VAS 5054A and upload parameters. VCP support - already few days silence. Will be looking for good ODIS cable. |
|||
14-04-2022, 17:31 PM,
Post: #6
|
|||
|
|||
RE: VCP and Steering Assist parameters for 4G0 909 144 G
If you know that for sure then ok.
Do I understand correctly that you want to flash from servo motor on the steering gear to without motor? |
|||
18-04-2022, 06:47 AM,
Post: #7
|
|||
|
|||
RE: VCP and Steering Assist parameters for 4G0 909 144 G
(14-04-2022, 17:31 PM)Dana Wrote: If you know that for sure then ok. I just want to upload correct parameters for my Steering Rack |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content