Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Comand NTG3.0 latest software/firmware
14-04-2022, 16:31 PM,
Post: #1
|
|||
|
|||
Comand NTG3.0 latest software/firmware
Hello, I'm looking for latest iso software update (no maps) for Comand NTG3.0 for Mercedes CL W216, actually I installed GPS Fix from CD and in DAS i got error that firmware version is (not specified) and want to flash original MB firmware back.
|
|||
17-04-2022, 09:26 AM,
Post: #2
|
|||
|
|||
RE: Comand NTG3.0 latest software/firmware
The error message is normal.
can you ignore sorry my english, I'm too old to learn.
Support for PET2, Poses, Piwis 2 and 3, and buying advice only in German |
|||
18-04-2022, 18:31 PM,
Post: #3
|
|||
|
|||
RE: Comand NTG3.0 latest software/firmware
(17-04-2022, 09:26 AM)maxtester Wrote: The error message is normal. Thank you for this info, but cant I edit this GPS fix to change firmware version or Come back to newest original software for delete this error? This is only one big F on my DAS short test results that flustrating me i dont want this error |
|||
29-04-2022, 14:00 PM,
Post: #4
|
|||
|
|||
RE: Comand NTG3.0 latest software/firmware
(18-04-2022, 18:31 PM)Luksor Wrote:What exactly are you attempting to do? I released the original GPS fix - it is normal for the COMAND to display a persistent fault because the flash from the optical media from Engineering Mode only updates the GPS-related file and thus increments the version number of it. Since it does not update other COMAND/Telematic components, the remain at the version they were on before the GPS update it applied. This results in a harmless, but unavoidable mismatch. The fault is only a result of the fact the GPS-related file is "newer" than the other components for the Tuner/DVD, etc., and it thinks that you attempted likely attempted a full Telematics update but the other components did not update for an unknown reason.(17-04-2022, 09:26 AM)maxtester Wrote: The error message is normal. It is nothing to be at all concerned about. As long as the COMAND is functioning normally, you can safely ignore that error. The GPS "fix" finally released by Daimler (same code as ISO I posted) months later has the same fault. |
|||
07-05-2022, 23:45 PM,
Post: #5
|
|||
|
|||
RE: Comand NTG3.0 latest software/firmware
Thank you for this useful information, just want to have no errors in my car when diagnosis
Thinking about maybe edit some files for not giving this error. What do you think? |
|||
02-06-2022, 20:22 PM,
Post: #6
|
|||
|
|||
RE: Comand NTG3.0 latest software/firmware
(07-05-2022, 23:45 PM)Luksor Wrote: Thank you for this useful information, just want to have no errors in my car when diagnosis I think you will need to edit files that are on the hard disk and part of the COMAND operating system to have it not do this. Daimler didn't release their "fix" until three months after I posted, and it is the exact same code (you can MD5 the ISOs if you want) and this was an acceptible fix for them - making the notification go away would involve Harmon and I would not think they have any contracts in place to support a device of that age. Almost like paying Microsoft an exhorbantant amount to continue pathing Windows 7 today - in almost all cases is not a reasonable proposition. |
|||
21-07-2022, 14:46 PM,
Post: #7
|
|||
|
|||
RE: Comand NTG3.0 latest software/firmware
Alright. But if this possible i want to install newest official software without GPS fix. Before update my time works correct. I want only to dont have this error on SD short test.
So I looking for newest jso for NTG3 w216 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content