Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ASD RETROFITTED AND CODED, NO SOUND ASD
19-04-2022, 07:23 AM,
Post: #1
|
|||
|
|||
ASD RETROFITTED AND CODED, NO SOUND ASD
Hi
I retrofitted HK and ASD on my car. HK AMPT with asd support. ESYS coded HK and ASD without problems editing FA to f31 340i Unfortunately i have no sound from ASD. HK work perfectly Any hint? |
|||
19-04-2022, 08:27 AM,
Post: #2
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
did you code your HU as well?
MGU Patching/Virginizing.
Feature Installer codes. Physical NBT EVO Repairs. CarPlay activations. Remote BMW Coding. [email protected] |
|||
19-04-2022, 09:06 AM,
Post: #3
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
|
|||
19-04-2022, 10:17 AM,
Post: #4
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
Do you have error code in ISTA? ASD not activated....
If my post helped you hit the thanks and reputation button. Thank you.
|
|||
19-04-2022, 11:14 AM,
Post: #5
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
(19-04-2022, 10:17 AM)user_530d Wrote: Do you have error code in ISTA? ASD not activated.... no errors on ista at all, the only thing i found is about RAD_ON According to diagrams, ASD ha two RAD ON, One from HK, on pin 7, and one from HU on pin 13. I checked both The one on HK is present, the one from hu is not present and pin 13 is not populated. My car is a f31 07/12 i wired a cable from pin 13 a42*1b (hu) to pin 10 A233 (ASD) Nothing changes. |
|||
19-04-2022, 12:07 PM,
Post: #6
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
RAD_ON goes from HU pin13 to ASD pin10 and ASD pin7 go to AMP pin2. The HU switches ASD on and ASD switches on AMP.
Normaly you have error in ISTA when ASD coded correctly and don't work. If my post helped you hit the thanks and reputation button. Thank you.
|
|||
19-04-2022, 14:00 PM,
Post: #7
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
(19-04-2022, 12:07 PM)user_530d Wrote: RAD_ON goes from HU pin13 to ASD pin10 and ASD pin7 go to AMP pin2. The HU switches ASD on and ASD switches on AMP. i have no errors at all. wiring is correct. is there a way to verify if rad_on from hu is working? |
|||
19-04-2022, 14:45 PM,
Post: #8
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
If RAD_ON working you will have upper 7 voltage on PIN 13 from HU.
If my post helped you hit the thanks and reputation button. Thank you.
|
|||
20-04-2022, 11:15 AM,
Post: #9
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
Very strange. 0v. Nbt evo. Coding issue?
|
|||
20-04-2022, 11:34 AM,
(This post was last modified: 20-04-2022, 11:35 AM by user_530d.)
Post: #10
|
|||
|
|||
RE: ASD RETROFITTED AND CODED, NO SOUND ASD
From CIC to NBT EVO retrofit. Have same problem last time with my EVO retrofit in F10. Most people had this problem and has used 30B for this.
Other write it is coding. I have coded all option but no success. I used signal from phantom power on antenna amplifier. If you use 30B end up with crack in speaker at starting. If my post helped you hit the thanks and reputation button. Thank you.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content