[nirvananils]

Maybe you should use VAS6154 and not these crappy slow J2534 Interface which only support PT Mode

[hana]

OK , I WILL TRY TO FIND ONE AND TEST IT...
TODAY I GOT A USED MODULE "8w7907468E", I INSTALL IT TO THE CAR , THE CAR START , BUT NOW I HAVE CP ON SEVERALS MODULE"CGW , ABS, AIRBAG AND INSTRUMENT "

I TRY TO USE GEKO ONLINE TO REMOVE THE CP , BUT I GOT ERROR FOR ALL MODULE THAT HAVE CP.
THE ERRORE CODE IS FAZ1102E

ANY IDEA HOW TO FIX

[mrbla]

8W7 should be gateway with b and e-call. Have this in my car since it came from Audi.
So the error is directly from VAG system for immo and cp.
Is there also a cp error at 19? If so try to get this done Rest should be ok.

Just a question the used 19. How was it extracted from car.
If it was part of a swap old for new unit function in odis it might be useless.
I think this ecus gets marked as not useable in the system.

But I’m not an expert with these things. Maybe there is someone else bringing more light into the dark.

[hana]

For the used CGW the VIN is already written, I tried to use Geko to remove the CP, but did not succeed.

[rehatflogs]

For the used CGW the VIN is already written, I tried to use Geko to remove the CP, but did not succeed.

Did you solve the issue of flashing?
Do you know what it was?
Thanks

[rojas]

Some news? I want to change my 8W5 gateway to 8W7 for acc.

[hana]

first buy a new Gateway module with the same part number, then use GEKO to adapt it to the vehicle.

[Ocis]

If he buys the same, he still only has an 8W5!