Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Icom Next A issue
21-04-2022, 20:10 PM,
Post: #1
XZBMW  Icom Next A issue
Hello, I have an ICOM NEXT original that can't read E83 3.0d '06, why is this due to the fact that there is no support for the K line? I used to have an ICOM A2 clone and I never had to build a bridge between 7 and 8 pins and now ICOM NEXT did not want to read any module and did not identify the car at all until I made a 7 and 8 pin bridge.

Do you have any idea why this is so?
The firmware of ICOM NEX is FW_03-15-08
ISTA Standalone 4.34.4x

Any help will be helpful.


Quote this message in a reply
21-04-2022, 20:18 PM,
Post: #2
RE: Icom Next A issue
Can you post picture from itoolradar fw next
Quote this message in a reply
21-04-2022, 20:26 PM,
Post: #3
RE: Icom Next A issue
(21-04-2022, 20:18 PM)Bimmer540 Wrote:  Can you post picture from itoolradar fw next

I can, but tomorrow it will be too late to go down to the garage again.


Quote this message in a reply
[+] 1 user says Thank You to vld for this post
21-04-2022, 20:40 PM,
Post: #4
RE: Icom Next A issue
Try

BMW_ISPI_ICOM-FW_03-22-11.msi
Quote this message in a reply
21-04-2022, 21:17 PM,
Post: #5
RE: Icom Next A issue
ICOM Next should read all BMW cars. If it can't then either it's faulty or there is something wrong with a car.
Quote this message in a reply
[+] 1 user says Thank You to Node for this post
22-04-2022, 00:39 AM,
Post: #6
RE: Icom Next A issue
It is faulty, there is no switching on pin 8 and most likely one of the 393 is faulty
Quote this message in a reply
22-04-2022, 10:44 AM,
Post: #7
RE: Icom Next A issue
(22-04-2022, 00:39 AM) ferrum Wrote:  It is faulty, there is no switching on pin 8 and most likely one of the 393 is faulty

Hi, I enclose a few screenshots and logs of the device, if anything more can be understood from them.

The device test passes without error.
If there is a defective element on the motherboard, I hope to replace it without additional conditions, it was purchased from a company distributor of OEM parts.


Attached Files Thumbnail(s)
                   
logs.zip
File Type: .zip
Downloaded: 4 times
Size: 62.05 KB



Quote this message in a reply
22-04-2022, 12:28 PM,
Post: #8
RE: Icom Next A issue
What are your settings in ISTA?
Quote this message in a reply
22-04-2022, 16:47 PM,
Post: #9
RE: Icom Next A issue
(22-04-2022, 12:28 PM)stefankrol Wrote:  What are your settings in ISTA?

I have no problem with the connection to vehicles set up on a local network with DHCP of ICOM.
I have diagnosed and programmed dozens of E9x / E6x / E7x / F10 / F30 and so on.
There is a problem specifically with the connection to the old E46 / E39 / E53 / E83.
And since until recently I used an ICOM A2 clone with which I had no problems connecting to any car, now I expected the same from ICOM NEXT A.
I have had it for a month and only now I had to inspect such a car and accordingly I realized that there is a problem.


Quote this message in a reply
22-04-2022, 17:21 PM,
Post: #10
RE: Icom Next A issue
When you connect old E46 / E39 / E53 / E83, you must give in first full vin and then connect to car...
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  The issue from the seventh circle of hell,,, 530d mj_mj_mj 18 1,010 Yesterday, 14:07 PM
Last Post: ____ANGEL___
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,744 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW Poor wifi signal from new ICOM's bmchicago 1 129 26-03-2024, 03:04 AM
Last Post: rocdeng
  I020 esys connection issue mcrussell 6 227 25-03-2024, 23:35 PM
Last Post: vanos
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 3,896 24-03-2024, 11:29 AM
Last Post: Twointje
  TESTO tool with ICOM Rolzs 5 316 17-03-2024, 20:23 PM
Last Post: Vojno
XZBMW Harman Kardon Most issue F10 Satia 3 159 14-03-2024, 07:09 AM
Last Post: vikro2000
  6WB Retrofit Issue painsage 5 307 06-03-2024, 17:02 PM
Last Post: painsage
  Request xHP 6HP decrypted files and icom flasher tste1982 10 824 05-03-2024, 22:47 PM
Last Post: bradsm87
  Ista D issue with VCX SE stjansdal 6 240 05-03-2024, 16:51 PM
Last Post: Transauto

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content