Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi A4 B6/8E cruise control without function after stage 1
23-04-2022, 06:48 AM,
Post: #1
|
|||
|
|||
Audi A4 B6/8E cruise control without function after stage 1
Hello friends,
I have the following problem. I have an Audi A4 B6 Avant 1,8T 163HP. I had Stage1 installed and since then the cruise control no longer works. Coding and unlocking is OK, it is also recognised but nothing is sent on CAN. If you reload the original, it works again as before. I now have the third file on it but it doesn't know what's wrong. Can anyone help me? Original and stage1 data would be available. |
|||
23-04-2022, 07:30 AM,
Post: #2
|
|||
|
|||
RE: Audi A4 B6/8E cruise control without function after stage 1
(23-04-2022, 06:48 AM)Dana Wrote: Hello friends, Need write back ori file. read by bdm and make stage1 from file what you read bdm. and cruise will work |
|||
23-04-2022, 09:32 AM,
Post: #3
|
|||
|
|||
RE: Audi A4 B6/8E cruise control without function after stage 1
if you remove the lambda by switch ...there is your problem the "switch' for cruise control is next to the lambda so.......
No help for people not give a feedback
|
|||
Reputation: +1 - ROD-BENDERS [+1] | |||
23-04-2022, 11:38 AM,
Post: #4
|
|||
|
|||
RE: Audi A4 B6/8E cruise control without function after stage 1
Thank you for the information.
What exactly do you mean by lambda and switch? I didn't actually specify that lambda should be deactivated. Did I understand correctly that the cruise control can be deactivated in the file? |
|||
23-04-2022, 12:24 PM,
Post: #5
|
|||
|
|||
RE: Audi A4 B6/8E cruise control without function after stage 1
post the original and tuned file
No help for people not give a feedback
|
|||
23-04-2022, 13:06 PM,
Post: #6
|
|||
|
|||
RE: Audi A4 B6/8E cruise control without function after stage 1
many thanks in advance for your efforts
|