Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ Peugeot 406 BSI VIRGIN
27-04-2022, 10:53 AM,
Post: #1
PPeugeot  Peugeot 406 BSI VIRGIN
Hi all.

Car is Peugeot 406 3.0 V6 2000year.

Replaced the dash with higher mileage and BSI synced with itfail

Ok, disassembled BSI and DASH, took off 93c66 from both, read with programmer, I dont know why, but BSI read in 8bit mode, made the mileage reset, and write back in 8bit mode. Now BSI has IMMO problem. Dash shows the corrected mileage.

Took off ecu to make immo off, but I assume the BSI will have some another problems.

BSI:
S110824600

BSI D9 B6
9642639080/00

What is my options?
Virgin file to BSI and make immo off from ecu?
New BSI and make immo off from ecu?
Somehow can I restore the BSI? I have the ori read.
Attached my readings.

If need I can read ecu as well, flash and eeprom.

Thanks in advance,

BR

Update: ecu dump also attached


Attached Files
406.zip
File Type: .zip
Downloaded: 4 times
Size: 176.02 KB

ktag.zip
File Type: .zip
Downloaded: 4 times
Size: 521.28 KB



27-04-2022, 12:57 PM,
Post: #2
RE: Peugeot 406 BSI VIRGIN
The problem seemed start since you've read the BSI. All the readings should be incorrect, since there is no VIN in the dump and of course no PIN.

You wrote the chip has been taken off for reading, but something went wrong. No matter whether 8 or 16 bit, after swap, the VIN and PIN must show up.
[+] 1 user says Thank You to zmann for this post
27-04-2022, 13:16 PM,
Post: #3
RE: Peugeot 406 BSI VIRGIN
(27-04-2022, 12:57 PM)zmann Wrote:  The problem seemed start since you've read the BSI. All the readings should be incorrect, since there is no VIN in the dump and of course no PIN.

You wrote the chip has been taken off for reading, but something went wrong. No matter whether 8 or 16 bit, after swap, the VIN and PIN must show up.

Thanks for your answer. What can I do to fix this?


27-04-2022, 15:47 PM,
Post: #4
RE: Peugeot 406 BSI VIRGIN
edited: just review your post and the Ktag files, no PIN in the ECU. Now what I can see is going with immo off is easiest.
Reputation: +1 - raffy haddad [+1]
[+] 2 users say Thank You to zmann for this post
30-04-2022, 07:05 AM,
Post: #5
RE: Peugeot 406 BSI VIRGIN
Thanks. Immo off in ecu eeprom made the trick and car has started.




Possibly Related Threads…
Thread Author Replies Views Last Post
PPeugeot Immo off and virgin needed for Valeo J34P ecu MARTINS AUTOMECH 1 40 26-03-2024, 06:53 AM
Last Post: sivyx
  Solved ✔ PEUGEOT PIN FROM BSI DUMP MARTINS AUTOMECH 3 123 26-03-2024, 05:51 AM
Last Post: MARTINS AUTOMECH
  PROBLEN TECODING PEUGEOT 407 2009 jeam 4 119 25-03-2024, 08:49 AM
Last Post: jeam
  Solved ✔ Please need flash firmware + eprm 95128 peugeot 407 jeam 1 50 24-03-2024, 19:27 PM
Last Post: jeam
  RFA virgin dump J.Boza 5 1,356 23-03-2024, 23:28 PM
Last Post: diag06
PPeugeot Solved ✔ Peugeot Boxer 3 Visteon DCU102 IMMO OFF/VIRGIN DavidForgac 4 129 22-03-2024, 07:40 AM
Last Post: DavidForgac
ODacia NEED virgin or immo off EMS3155 DACIA DUSTER foulou0238 1 83 21-03-2024, 21:35 PM
Last Post: maros4341
PPeugeot PSA SID201 IMMO OFF-virgin LMartin 1 76 21-03-2024, 11:00 AM
Last Post: LMartin
PPeugeot Solved ✔ PEUGEOT 3008 MD1CS003 IMMO OFF d-dtronik 3 136 20-03-2024, 20:58 PM
Last Post: d-dtronik
PPeugeot PSA Valeo V34.3 Virgin! khaledauto 2 101 20-03-2024, 05:34 AM
Last Post: khaledauto

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content