Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-P Loaders 6.1 to 6.6
28-04-2022, 16:11 PM,
Post: #1
XZBMW  ISTA-P Loaders 6.1 to 6.6
ISTA-P Loaders clapping


Attached Files
HTM_ISTA-P_Loaders.txt
File Type: .txt
Downloaded: 468 times
Size: 54 bytes


idea Click @ Thanks & Rep. idea 
* BUY  -> MEGA.nz Account 
CREATE AN ACCOUNT YOURSELF - GET THE DATA INTO YOUR ACCOUNT - OFFER IT TO SOMEONE ELSE FROM THERE
Reputation: +18 - Bmw325x [+1] , Dirchik [+1] , schaeublew [+1] , McMihai [+1] , ibi1961 [+1] , kotbmw [+1] , santanas [+1] , paino [+1] , Alpha9098 [+1] , relekexe [+1] , sineDko [+1] , Dieusev [+1] , huk_00 [+1] , qeen [+1] , M-Simon [+1] , DoZe [+1] , wecki [+1] , simzep [+1]
Quote this message in a reply
[+] 37 users say Thank You to hashtagmaster for this post
13-08-2022, 17:17 PM,
Post: #2
RE: ISTA-P Loaders 6.1 to 6.6
(28-04-2022, 16:11 PM)hashtagmaster Wrote:  ISTA-P Loaders clapping

Whats the differences between them? Why would someone use a lower version?
Quote this message in a reply
14-08-2022, 17:03 PM,
Post: #3
RE: ISTA-P Loaders 6.1 to 6.6
Lower versions you can use Enet and k+dcan cable
Quote this message in a reply
11-09-2022, 05:40 AM,
Post: #4
RE: ISTA-P Loaders 6.1 to 6.6
updates & renewals

idea Click @ Thanks & Rep. idea 
* BUY  -> MEGA.nz Account 
CREATE AN ACCOUNT YOURSELF - GET THE DATA INTO YOUR ACCOUNT - OFFER IT TO SOMEONE ELSE FROM THERE
Quote this message in a reply
27-11-2023, 17:27 PM,
Post: #5
RE: ISTA-P Loaders 6.1 to 6.6
Are there recent versions with support for K+DCAN* / ENET?

Is there any possibility for support in the future if not now?

I do hope adore beemerboy is still in existence... biggrin

Thanks...

P.S.
I just realized that the included Loader 6.1's folder includes the file "Einstellung bei Loader V6.1F.de" which has instructions*(in German) for enabling 6.1(with support for K+DCAN/ENET) to work with more recent ISTA-P (e.g. 3.72 confirmed with standalone version).

* Translated:
1. Open the ISTA-P installation folder and locate the “application.xml” file and
open it with the editor.

2. Change the value “distributionVersion="xx.x.xxx" to the value “distributionVersion=“3.xx.x.xxx“
So just expand the beginning of the version with 3.
Don't enter xx.x.xxx there!! Only at the beginning 3. Register(save file)!!
!!Everything else stays as it is!!

But it would be reassuring to have a more recent version Loader with the support as I'm not sure how reliable the 6.1 would be with more recent versions of ISTA-P.

Cheers...
Quote this message in a reply
28-11-2023, 05:06 AM,
Post: #6
RE: ISTA-P Loaders 6.1 to 6.6
(27-11-2023, 17:27 PM)tinkerman Wrote:  Are there recent versions with support for K+DCAN* / ENET?

Is there any possibility for support in the future if not now?

I do hope adore beemerboy is still in existence... biggrin

Thanks...

P.S.
I just realized that the included Loader 6.1's folder includes the file "Einstellung bei Loader V6.1F.de" which has instructions*(in German) for enabling 6.1(with support for K+DCAN/ENET) to work with more recent ISTA-P (e.g. 3.72 confirmed with standalone version).

* Translated:
1. Open the ISTA-P installation folder and locate the “application.xml” file and
open it with the editor.

2. Change the value “distributionVersion="xx.x.xxx" to the value “distributionVersion=“3.xx.x.xxx“
So just expand the beginning of the version with 3.
Don't enter xx.x.xxx there!! Only at the beginning 3. Register!!
!!Everything else stays as it is!!

But it would be reassuring to have a more recent version Loader with the support as I'm not sure how reliable the 6.1 would be with more recent versions of ISTA-P.

Cheers...

Are you sure you want to flash/code a hu or a DME/DDE with kdcan via ISTA P?
Get an icom to avoid an interrupted process
Quote this message in a reply
28-11-2023, 06:10 AM,
Post: #7
RE: ISTA-P Loaders 6.1 to 6.6
proper DCAN cable works perfectly fine for flashing for most of the units, except those on MOST.
Quote this message in a reply
28-11-2023, 08:06 AM,
Post: #8
RE: ISTA-P Loaders 6.1 to 6.6
(27-11-2023, 17:27 PM)jaramillo Wrote:  ...
Are you sure you want to flash/code a hu or a DME/DDE with kdcan via ISTA P?
Get an icom to avoid an interrupted process

For me, this is for personal use, and I don't have an urgent need for it (not in need of flash programming) at the moment. But I want to stay aware of the technical requirements, features, issues etc. for when I might need to use it immediately.

I will eventually get a genuine ICOM from a local BMW Service Center(for a very reasonable price, 4~6 week to delivery) if I absolutely need to do say an overall I-Level update or some other long process that would be step/sequential order sensitive including follow up coding etc. (that would be tedious to do manually with WinKFP, NCS, Tool32).

In the meantime, it would be nice to use a K+DCAN cable to test the latest versions of ISTA-P from time to time -  connection with ECUs, simple non-programming features, to stay up to date with the latest features & issues of the software & interfaces.

BTW, I appreciate/respect your advising folks to get an ICOM... Thanks again for sharing ...
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 236 29 minutes ago
Last Post: RaoulK1998
  ista 4.46 Standalone kiranabc 25 2,630 36 minutes ago
Last Post: Siki78
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,206 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 626,277 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,397 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 116 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 154 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 659 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,393 24-03-2024, 23:45 PM
Last Post: armenh7
  REQUEST ista 4.45.21 the ISTAGUI.exe file ddsx 5 321 24-03-2024, 14:15 PM
Last Post: Mathijshee

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content