Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Vauxhall corsa D 2010
04-05-2022, 07:19 AM,
Post: #1
|
|||
|
|||
Vauxhall corsa D 2010
Hi guys,
Can some please point me in the right direction Had issues with mid speed cam mismatch. Decided to to hit the button ECU reset. Oh boy the car won't start. P1610 showing on op com. Used another diagnostic tool and that's showing no errors. Spanner light flashing. Tried to reprogram key and still flashing. Help would be really useful. |
|||
05-05-2022, 04:27 AM,
Post: #2
|
|||
|
|||
RE: Vauxhall corsa D 2010
You need security code ( CARPASS ) and you have pair that controller that you reset it back and restore all coding variants
You never reset a controller in a car if you do not wanna "move" it in another one. Good luck |
|||
05-05-2022, 23:03 PM,
Post: #3
|
|||
|
|||
RE: Vauxhall corsa D 2010
did the same a while ago because I thought it would be some "calibration" reset or something... but note... you just have "divorced" the ecu. So just do the following its easy.
so step by step: “Body”→ “Programming”→ “Immobilizer Programming” Click “Security Code” and enter security code Click “Program Immobilizer Function” -> ECM installed. it should take just some seconds and sometimes you already hear the fuelpump starting. now the immo-light in the dashboard should be gone. now do a ignition off -> wait about 30 secs. ignition on -> waiting about 30 sec. and try to start. And make sure to do a complete faultcode scan + clearing afterwards. this cleans out any immorelated faultscodes in several ecus. good luck |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content