Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi A8 3.0 TDI original ECU file pre-diesel gate
04-05-2022, 11:32 AM,
Post: #1
|
|||
|
|||
Audi A8 3.0 TDI original ECU file pre-diesel gate
Hi,
Recently my dealership did the diesel gate modification while performing a repair. Since then the car runs more roughly and I'm experiencing some problems. I'd like to restore to the software without diesel gate modifications. I have a log of before and after. Who can provide me with an SGO or FRF so I can restore the software? I've got VCP and ODIS for flashing. Furhtermore, is it necessary to restore the software of the transmission to an earlier version as well? Before: Address 01: Engine (J623-CTBA) Labels: None Part No SW: 4H0 907 401 H HW: 4G0 907 401 E Component: 3.0TDIEDC17 H14 0002 Revision: 58H14--- Coding: 0A2A403A056601030000 Shop #: WSC 02391 785 00200 ASAM Dataset: EV_ECM30TDI0114H0907401H 001005 ROD: EV_ECM30TDI0114H0907401H.rod VCID: 2959BECB48F87B02A2-807C After: Control Module Part Number: 4H0 997 401 E HW: 4G0 907 401 E Component and/or Version: 3.0TDI EDC17 H14 0002 Software Coding: 0A2A403A056601030000 Work Shop Code: WSC 28888 004 1048576 ASAM Dataset: EV_ECM30TDI0114H0997401E 001002 (AU64) VCID: 2F6D50D3761C15F1E8-807A Thanks in advance! Vincent |
|||
14-05-2022, 12:21 PM,
Post: #2
|
|||
|
|||
RE: Audi A8 3.0 TDI original ECU file pre-diesel gate
I looked at some older AutoScans and saw that the automatic has been updated before. The oldest version was 0002 and then the automatic was updated to 1010; with the diesel modification the software was updated to 1011. The software number has remained the same: 4H1 927 158 CL. I managed to downgrade the automatic's software to version 1010.
As for the software for the engine, I found TPI 2040900/3. It mentions software version 4H0 907 401 H, with an upgrade to 4H0 907 401 P version 0002. This software is included (as FRF) in the Flashdaten. However, when downgrading, I get a message: "No valid flash session 'FL_4H0907401P_0002.frf' could be determined for the current module 'Engine electronics' in the selected flash container." The option that the software version numbers must match is already disabled in ODIS Engineering 14.1 Who has the solution? |
|||
14-05-2022, 19:47 PM,
Post: #3
|
|||
|
|||
RE: Audi A8 3.0 TDI original ECU file pre-diesel gate
if you need
this file is for write with Ktag, Trasdata, Flex, Autotuner, or another tool |