Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

MCU MC68HCP11E1
04-05-2022, 14:33 PM,
Post: #1
ORenult  MCU MC68HCP11E1
Hi to all,
can anybody help me how to read MCU MC68HCP11E1VFN with carprog or upa. Need immo off laguna 1. I try but with no succes. For upa does need external power or not, and adapter type, I see four pics same 13*13. Carprog also with power adapter or not, I supose A10 cable but not sure for pinout.
Best regards
Quote this message in a reply
04-05-2022, 15:52 PM,
Post: #2
RE: MCU MC68HCP11E1
for this you will definitely need external power for both of the programmers. I cannot help you with connection but for upa im using standard bga cable stripped. You just need to find datasheet for this mcu and upa will tell you which pin is what. For example pin 5 VCC - in datasheet you will find that on this mcu vcc is pin 34. (not true, just for example). And in this way you can connect it.
Quote this message in a reply
[+] 1 user says Thank You to BobbySD for this post
04-05-2022, 16:16 PM,
Post: #3
RE: MCU MC68HCP11E1
Did you read it on adapter ?
Quote this message in a reply
[+] 1 user says Thank You to zmann for this post
04-05-2022, 17:34 PM, (This post was last modified: 04-05-2022, 17:44 PM by galisdoo.)
Post: #4
RE: MCU MC68HCP11E1
(04-05-2022, 16:16 PM)zmann Wrote:  Did you read it on adapter ?

Yes i will try with Type 9 but not success. I not use externel power maybe burn mcu, i dont know.
Best regards

(04-05-2022, 15:52 PM)BobbySD Wrote:  for this you will definitely need external power for both of the programmers. I cannot help you with connection but for upa im using standard bga cable stripped. You just need to find datasheet for this mcu and upa will tell you which pin is what. For example pin 5 VCC - in datasheet you will find that on this mcu vcc is pin 34. (not true, just for example). And in this way you can connect it.

I see something similar.


Attached Files Thumbnail(s)
   
Quote this message in a reply
04-05-2022, 18:15 PM,
Post: #5
RE: MCU MC68HCP11E1
upa reads this fine without external power,try cleaning very very carefully the mcu pins,most of the time this is the issue
Hc11 adapter should be i think type 6
Quote this message in a reply
[+] 1 user says Thank You to Red_Mango for this post
04-05-2022, 19:46 PM,
Post: #6
RE: MCU MC68HCP11E1
(04-05-2022, 18:15 PM)Red_Mango Wrote:  upa reads this fine without external power,try cleaning very very carefully the mcu pins,most of the time this is the issue
Hc11 adapter should be i think type 6

I desolder and clean but not try with another type. I see datasheet it is similar like mc68HC11A8, A1, A0, it is try or not.
BR
Quote this message in a reply
05-05-2022, 08:23 AM,
Post: #7
RE: MCU MC68HCP11E1
Lift RST Rx and Tx
Quote this message in a reply
[+] 1 user says Thank You to lupu_sandu for this post
05-05-2022, 12:58 PM,
Post: #8
RE: MCU MC68HCP11E1
(05-05-2022, 08:23 AM)lupu_sandu Wrote:  Lift RST Rx and Tx

I read with carpog like HC11A1, anzbody immo off solution for this ecu Siemens S101727104 HOM7700860316 BVA/BVM.


Attached Files
andjelasreca.zip
File Type: .zip
Downloaded: 5 times
Size: 456 bytes

Quote this message in a reply


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content