[Mira250f]

Hello
Please, i have Audi A3 8L 2001 (facelift) And i need change mileage...(old cluster is not working and i change for another cluster) i make immo of in ecu. But now i need mileage change...

I have digiprog3, vag k+can commander, VagCanPro ( clone tools )
Cluster is ''8L0 920 900 G''
Is it possible via obd with digiprog od vag k+can ?
Or only via BDM ?

My digiprog has this options
-VDO c56 -1997
-UKNSI C56 -1997
-VDO DIAG -2000
-VDO DIAG 2000-
-M73 DIAG
-repair 999999

I making similar A3 8L before 3 years via digiprog and digiprog making fail (999999km) after that i must repair via BDM with digiprog... But for now i want sucesfull od first try .. And i lost wiring for repair via digiprog St41..

Thanks

[evg_eni]

Better and secure way is from dump motorola hc12. Through obd is unknown result for this crappy clusters (magnetti marelli) Jaeger

[Mira250f]

Better and secure way is from dump motorola hc12. Through obd is unknown result for this crappy clusters (magnetti marelli) Jaeger

Thanks And whats Equipment/device is using for read this hc12? Carprog is Ok?

[evg_eni]

yes, no problem with carprog and a10 adapter

grey - BKGD
blue - RESET
red - +5v
brown - GND

[Mira250f]

yes, no problem with carprog and a10 adapter

grey - BKGD
blue - RESET
red - +5v
brown - GND

i send PM to you.